What will that do to the flow? Will it flow like at 2.5" muffler?
For sure it has to increase the flow thru the stock muffler just like the cat delete pipe does
What will that do to the flow? Will it flow like at 2.5" muffler?
For sure it has to increase the flow thru the stock muffler just like the cat delete pipe does
Today, the F4 went on...
The Ride Command is very easy to pull forward and out of the way, so you can get into the space behind it.
Contrary to the install video, I had to install the center brace offset to the rear, as opposed to the front, or else the hole in the windscreen would not line up properly.
And, voila! The finished product looks pretty good. I questioned if any after market windscreen would fit between the pillars of the Polaris Slingshade and, as you can see, it fits nicely.
Took mama for a ride tonight and we both like it. I think this is good mod.
Bravo.......nice job, love that color
Thank you!
Display MoreToday, the F4 went on...
The Ride Command is very easy to pull forward and out of the way, so you can get into the space behind it.
Contrary to the install video, I had to install the center brace offset to the rear, as opposed to the front, or else the hole in the windscreen would not line up properly.
And, voila! The finished product looks pretty good. I questioned if any after market windscreen would fit between the pillars of the Polaris Slingshade and, as you can see, it fits nicely.
Took mama for a ride tonight and we both like it. I think this is good mod.
As temps continue to go UP you will probably want to add the Baker 'Air Wings' --- bringing in some are movement to the cockpit.
Trooper anytime you need a dolly to get all your parts into the garage it’s a good day
Yes sir you are correct
Not really a project unless you consider changing back to halogens. This is the 3rd Outer LED that has stopped working since last summer. They are the T2s from SM. The center ones have never failed. Ordered 2 cheap h3 LEDs online. I'm curious to see how long they will last.
As temps continue to go UP you will probably want to add the Baker 'Air Wings' --- bringing in some are movement to the cockpit.
Thanks, EJ... I was thinking the same thing. I also saw a small one somewhere that fastens to the top. Not sure if I'll do those, but thanks for the tip.
Not really a project unless you consider changing back to halogens. This is the 3rd Outer LED that has stopped working since last summer. They are the T2s from SM. The center ones have never failed. Ordered 2 cheap h3 LEDs online. I'm curious to see how long they will last.
I feel your pain and have been there as well. You would think that something that has no filament would never malfunction. However if you read on these everyone of them is made in China I believe.......
Guys I know this is not a John Deere Lawn Tractor thread but I got to get the lawn mowed before I ride the Sling. The mower won't run unless I hold the choke fully engaged. It runs fine that way as soon as I let go it starts stumbling bad. I suspect it is the carburetor but some of you guys were born with a wrench in your hand I believe. I have replaced the air filter and the fuel filter is one of those glass ones and looks clean.
Guys I know this is not a John Deere Lawn Tractor thread but I got to get the lawn mowed before I ride the Sling. The mower won't run unless I hold the choke fully engaged. It runs fine that way as soon as I let go it starts stumbling bad. I suspect it is the carburetor but some of you guys were born with a wrench in your hand I believe. I have replaced the air filter and the fuel filter is one of those glass ones and looks clean.
Maybe add some fresh premium fuel with a little Seafoam gas treatment? Also make sure your throttle cable is operating full range.
I "Googled" it, but only found what you've already said about cleaning the carburetor. Either it's dirty or the air/fuel mixture is out of adjustment. Good luck.
Thanks guys I found a new can of Carb spray cleaner in my stock and going to give that a try first.
Thanks guys I found a new can of Carb spray cleaner in my stock and going to give that a try first.
Most likely moisture in the carb.
No joy. Tried to mow the yard while holding the choke full on. Got a few rounds in, I got nearly two acres to mow, and it quit. Got to drain some gas out of the tank to see if that last can maybe had some water in it. Going to order a carb they are less then $30 and maybe a turbo.
No joy. Tried to mow the yard while holding the choke full on. Got a few rounds in, I got nearly two acres to mow, and it quit. Got to drain some gas out of the tank to see if that last can maybe had some water in it. Going to order a carb they are less then $30 and maybe a turbo.
In this particular case, I guess it's okay to throw the baby out with the bath water... lol 😆
No joy. Tried to mow the yard while holding the choke full on. Got a few rounds in, I got nearly two acres to mow, and it quit. Got to drain some gas out of the tank to see if that last can maybe had some water in it. Going to order a carb they are less then $30 and maybe a turbo.
If you can get gas without the alcohol --- use that in any of the small engines that set for a time. It's the alcohol that 'gums' up the equipment.
As temps continue to go UP you will probably want to add the Baker 'Air Wings' --- bringing in some are movement to the cockpit.
They are a big help to divert air during the cold months as well
For sure it has to increase the flow thru the stock muffler just like the cat delete pipe does
How much louder is it minus the cats? Is the sling you will be bringing to SITS done like this? if so, I will be sure to have a listen. I welcome you to send me the picture of the mod
How much louder is it minus the cats? Is the sling you will be bringing to SITS done like this? if so, I will be sure to have a listen. I welcome you to send me the picture of the mod
Yes Sling II will be in Maggie. To me it is the best sounding exhaust out there. I made a two trip last summer and at no time did the tone bother me