What is this rusty nut hold or do and can I get a cover for it.
Nut cover
-
-
What is this rusty nut hold or do and can I get a cover for it.
.
Cam chain tensioner ..... leave it alone or .....
....................
-
Slingshotonly makes a cover....but mines feel off must not have been tight enough....SO I purchased a DDM Supercharger - covered it up totally
Or you could just paint it with high heat paint... -
Not planning to ever messing with it. But I hate looking at it. Ugly rusty crap. Thanks for the responses.
-
All things chrome nut cover..........
-
on my first Sling I used hi-temp silver paint and a brush. Turned out good. The new Sling has a Stainless plug. Maybe you could by a new part from Polaris. It will take 2 weeks.
-
.
Just a word of caution .....
It is not a plug, cover, or bolt ..... it is the cam chain tensioner itself ....
Loosening it then re-tightening can cause the ratchet mechanism to extend and over-tension your cam chain, removing it can cause your cams to jump timing and would also require resetting the tensioner before installation .....
.....
-
.
Just a word of caution .....
It is not a plug, cover, or bolt ..... it is the cam chain tensioner itself ....
Loosening it then re-tightening can cause the ratchet mechanism to extend and over-tension your cam chain, removing it can cause your cams to jump timing and would also require resetting the tensioner before installation .....
.....
VERY GOOD point. Just paint.
-
Drip hot wax on it to show it who's boss through pain/pleasure display.
-
Ordered the one from slingshotonly. I hate Everytime I'm on that side cleaning, maintenance, etc etc that nut staring at me.
-
-
A scuffing with steel wool followed by a coat of hi temp paint solves the problem. Waaay cheaper than buying a cover.
-
-
-
Here is a Tried & True Nut-Cover
........................... tom n carol -
Here is a Tried & True Nut-Cover
........................... tom n carolDoes it come in chrome?