I had the dealer tighten it up because it wouldn't hold the bike....about 3weeks later I had the wheels removed to have metal valve stems installed at my tire shop...when I got home that day the e brake didn't work again...it will not hold the bike and it's pulled all the way up....there is no resistance when pulling it up.....just like before the dealer fixed it...
There are adjustment nuts under the e brake handle that take out the cable slack...can you adjust them from on top or do you have to get under the bike to reach them?
As per the service manual...2 clicks the dash e brake light should come on, 8 clicks the wheel should not move if turned by hand...I'm assuming that's jacked up...and 10 clicks the bike should not roll...