I have the Twist Dynamics sway bar installed on my slingshot. it has holes for three possible stiffness settings. When I installed my sway bar I was told I needed to get adjustable end links if I wanted to use the two stiffer adjustment holes, as such I used the stock end links in the end most adjustment holes. At some time in the future I would like to try the stiffer settings ,but when I look at it it looks as if the clearance to use those holes gets very limited and could cause the end links to contact the steering rods.
If you have an adjustable sway bar and are using the stiffer settings with adjustable end links I would love it if you could post a picture or two showing the end link and clearance between it and the steering rods. Also I have read that on the sway bars with three adjustment points that moving the end link to the front of the A-arm is required to get the needed clearance again if you have done this I would love to see any pictures you might have showing this
Thanks