Would a bolt in roll bar with no cutting be a product you would be interested in? 14
-
Yes (9) 64%
-
Not Really (5) 36%
So as some of you have seen already, I put a stronger roll bar on my SS. We were toying around with the idea of producing 5-10 of them if there was enough interest. They would require no cutting of the body panels and would be a direct bolt on. I still need to figure out what to do about the exposed holes though. It would probably be something similar to what they use on those Cobra style roll hoops. It would look extremely similar to the one in the pics but minus the rear kick bars we just added in the pics at the bottom. All of the bars would have a slightly different bend angle towards the bottom so no cutting of the plastic would be needed. We could even potentially mount eyelets to them for those utilizing harnesses and not the OEM seat belts. I'm just curious if this would be anything anyone would be interested in. I'm open to all comments and constructive critiques. You're not going to hurt my feelings if you say you don't like it. I'm throwing this out there as a few people had contacted me about making one when they saw pics before and I would like to see if there is enough interest to make a small run of them. They will all be made out of 2" .120 wall roll bar tubing. We could POSSIBLY make them out of chrome moly but that could get expensive. Let me know your thoughts!
Here is what it would look like
Here is the progress we are making on mine