Man no one told me this would be a JOB smh but I'm not giving up , no sir.........
Hood Pins
-
-
Man no one told me this would be a JOB smh but I'm not giving up , no sir.........
There is always something that you want to do to the SS.
-
There is always something that you want to do to the SS.
Put gas in it, clean it and drive it.....
-
Man no one told me this would be a JOB smh but I'm not giving up , no sir.........
i am sure i said it was not a quick job. But once you start there is no turning back. You can do it!
-
Man no one told me this would be a JOB smh but I'm not giving up , no sir.........
If it were easy, everybody could do it and no one would be special.
Now, go be special...
-
Put gas in it, clean it and drive it.....
FunCycle hates when you clean them
-
FunCycle hates when you clean them
Some people are just ANAL!
-
i am sure i said it was not a quick job. But once you start there is no turning back. You can do it!
Well sir you are right on this mod, once you start there's no return.......I've got one complete and 75% done on the other , would have been done but my son needed my quick Jack system and my slingshot was happily sitting on it up in the air .......so I'll finish up tomorrow , hopefully ..
-
-
I must say I like how it came out, the function & I'm able to lock em....thanks again gooseman
I can't take the credit for this one. rabtech was the first to cut into his hood and make it happen. I must say the blue looks real good. You will really like them over the push button. These you know that they are locked or released unlike the pins and buttons
-
Question for those folks who have added hood pins and then removed and reinstalled the hood - Any problems getting everything realigned?
-
Question for those folks who have added hood pins and then removed and reinstalled the hood - Any problems getting everything realigned?
Not sure of the question in relation to the hood LATCHES, once you align the hood LATCHES right where they need to be & start making your cut, that hole that was used for the hood PIN will not be there any longer.....
.... Not sure if that answered your question......
-
I was wondering how hard it might be to get the hood reinstalled so that the pins on the frame line up properly with the catches in the hood.
-
The pins that hold the hood on will re align the hood pretty well in the exact spot. Not much play on the hinges where the hood attaches
-
I had installed and removed a set of extended range hood hinges after the single gas cartridge shifted my hood way out of normal alignment* and while I have the hood somewhat realigned, I still want to get the alignment better before I install the ZZP Billet Hood Hinge set I ordered a while back. Sounds like I need to get the alignment the way I want it before installing the new hood hinges and then I should think about the hood pins.
* I loosened the hinge bolts fastening the hinge to the frame, but didn't remove the gas cartridge, which resulted in the single gas cartridge shifting everything.
-
I have had my hood off many times and have the DDM extended hinges and have never taken the gas assist cylinder off since installed. I remove the 4 bolts / nuts (2 each side ) that attach the hinge to the hood structure and I don't believe (could be wrong as I was wrong once before yrs ago ) that there is much clearance in the bolt hole for misalignment of the hood
-
My mistake was trying to adjust the hood alignment with the gas cartridge still connected. Had I disconnected it before loosening the frame bolts, I wouldn't have had a problem. I think I just got in a hurry and didn't think....
-
I am done. I have had Phil's hood pins for a year now, and have been through at least 7 people saying they will look and then saying nope they will not install!
Gonna sell them!
-
I am done. I have had Phil's hood pins for a year now, and have been through at least 7 people saying they will look and then saying nope they will not install!
Gonna sell them!
...wish we were near by but we're not...
-
I am done. I have had Phil's hood pins for a year now, and have been through at least 7 people saying they will look and then saying nope they will not install!
Gonna sell them!
What color & how much?
Photo?