Alpha Powersports turbo sale at Maggie Valley, installation included...
OOOOOOHHHHH!!! Must..... Resist..... possibly the most difficult thing I've had to do.....
Nice deal for sure!
Alpha Powersports turbo sale at Maggie Valley, installation included...
OOOOOOHHHHH!!! Must..... Resist..... possibly the most difficult thing I've had to do.....
Nice deal for sure!
Display MoreI hope you guys that are going to Maggie Valley will do me a favor.
Tell Alpha they are missed here and are missing out on sales.
I love my fellow Wisconsin cheddar heads at Alpha. I understand things may have happened that didn't go right or as desired but I hope that can be put in the past.
I love this forum. I love it so much because it makes me smarter and allows me to connect with folks like me all over the country - heaven knows there isn't another slingshot in Wisconsin on this forum.
Because of how thankful I am for this forum I listen closely to those that post here. I am more likely to purchase products that are promoted and talked about here.
Even if the business model of Alpha dictates that they cannot be a vendor here I can honestly say that I miss the jokes from Henry and insight into the machine we all love to ride. I don't have to understand or approve of their giving up on sales to me via this forum but I do miss my brothers in the north woods.
@mniron @DKF Texas @Tripod or anyone else that might bump into Alpha please tell them they are missed. If they can't do the sponsoring vendor gig they should be able to post jokes and exploits of their adventures like anyone else here
@Ross - agree - unfortunate that we don't have Alpha participation on this forum anymore. I have wanted to express similar sentiments previously but wasn't sure how. The situation between a few people have impacted the many who participate on this forum.
Also at Maggie Valley, Alpha will be installing Ultimate Alarm System (GPS tracking, proximity, 2-way alert, etc.). Way too much information to post here so here's a link to the details:
I finally have all appointment times made for mods to be installed in Maggie Valley. I will be arriving Monday evening late.
Tuesday morning 9:00 am with DDM
Install DDM Super Charger kit
Install DDM Oil Filter relocation kit
Install DDM Oil Cooler
Install DDM Center Feed Fuel Rail
Install Boost/ A/F Ratio Gauge
Tune
Tuesday afternoon 5:00 pm with Welter
Install Welter WP 2.5 Inch Dual Exhaust- Carbon Fiber Cans
Thursday Morning at 9:00 am Alpha
Laser Alignment
And Install Baker Air Wings
Well we are all the same, please close my window
money-flying-out-the-window-animated-gif-clr.gif
Display MoreI finally have all appointment times made for mods to be installed in Maggie Valley. I will be arriving Monday evening late.
Tuesday morning 9:00 am with DDM
Install DDM Super Charger kit
Install DDM Oil Filter relocation kit
Install DDM Oil Cooler
Install DDM Center Feed Fuel Rail
Install Boost/ A/F Ratio Gauge
Tune
Tuesday afternoon 5:00 pm with Welter
Install Welter WP 2.5 Inch Dual Exhaust- Carbon Fiber Cans
Thursday Morning at 9:00 am Alpha
Laser Alignment
And Install Baker Air Wings
Very SWEET!!!!!
Display MoreI finally have all appointment times made for mods to be installed in Maggie Valley. I will be arriving Monday evening late.
Tuesday morning 9:00 am with DDM
Install DDM Super Charger kit
Install DDM Oil Filter relocation kit
Install DDM Oil Cooler
Install DDM Center Feed Fuel Rail
Install Boost/ A/F Ratio Gauge
Tune
Tuesday afternoon 5:00 pm with Welter
Install Welter WP 2.5 Inch Dual Exhaust- Carbon Fiber Cans
Thursday Morning at 9:00 am Alpha
Laser Alignment
And Install Baker Air Wings
Well damn it @av8ingtom I was gonna poor mouth around you and see if you would "loan" me some moneys, cause I needs some mo DDM love too.
Good for you though Tom, you really gonna like what comes out of that tent Tuesday. I hope I get there in time to watch that smile.
Display MoreI finally have all appointment times made for mods to be installed in Maggie Valley. I will be arriving Monday evening late.
Tuesday morning 9:00 am with DDM
Install DDM Super Charger kit
Install DDM Oil Filter relocation kit
Install DDM Oil Cooler
Install DDM Center Feed Fuel Rail
Install Boost/ A/F Ratio Gauge
Tune
Tuesday afternoon 5:00 pm with Welter
Install Welter WP 2.5 Inch Dual Exhaust- Carbon Fiber Cans
Thursday Morning at 9:00 am Alpha
Laser Alignment
And Install Baker Air Wings
I would suggest you rethink that appt schedule. Not trying to be an ass, but you get the tune before the Welter exhaust. That will affect your tune. If I were you, I'd get all the rest done but the tune, get the Welter installed, and then the tune. That Welter should scavenge the exhaust better, and could even leave your tune lean. No one wants or needs lean with any form of boost.....
$.02 tossed for what it's worth.....
I would suggest you rethink that appt schedule. Not trying to be an ass, but you get the tune before the Welter exhaust. That will affect your tune. If I were you, I'd get all the rest done but the tune, get the Welter installed, and then the tune. That Welter should scavenge the exhaust better, and could even leave your tune lean. No one wants or needs lean with any form of boost.....
$.02 tossed for what it's worth.....
Thanks for the info. I have talked to both Jeff and Dave at DDM and Angie at Welter. They will be working together on the installs. I think DDM is going to install the supercharger kit, push it over to Welter to install the exhaust and push it back to the DDM site to finish the install. I spoke to everyone involved again yesterday and DDM is aware of the Welter install the same day, and I was assured no worries. Everyone seems very willing to help me get most of this done on the first day because I want to ride.
Well damn it @av8ingtom I was gonna poor mouth around you and see if you would "loan" me some moneys, cause I needs some mo DDM love too. Good for you though Tom, you really gonna like what comes out of that tent Tuesday. I hope I get there in time to watch that smile.
and I will be waiting on you, and bring that coonass @Bill Martin with you.
looked at the long range weather forecast... Wednesday May have the most rain with a little on Thursdays.
Other than that not very hot.
@Ruptured Duck when are you getting to MV?
@Ruptured Duck when are you getting to MV?
@SlingRider we will be getting in early Tuesday to set up. Should be up and running no later than 10am
@SlingRider we will be getting in early Tuesday to set up. Should be up and running no later than 10am
we will find you sometime on Tuesday. Probably after we get back from a ride.
I have something for you!!!
FREE to a Good Home
I will be bringing the following
6" x 9" Flag Holder Kit for the Polaris Slingshot without the flags
Fab Factory Rear Axle Nut Lock and Belt Drive Cover without the Belt Drive Cover in Red
If anyone would like them, PM me here (Must be attending SSITS2017)
** UPDATE Both Going to New Homes **
Flags Holders go to @kyslingshot
Fab Factory Rear Axle Nut goes to @okc super ss
Six days and a wake up til we roll out May 29th for Maggie Valley. Currently weather is calling for a wet insertion...
Six days and a wake up til we roll out May 29th for Maggie Valley. Currently weather is calling for a wet insertion...
Looks wet at times, but usually get a shower at some point while there. Wed is calling for 1/4 inch, might do Wheels Thru time that day if it continues to look like that. Thursday is 50% chance, but only .09 inch. At least the trip down on Monday (actually staying at Robbinsville and coming in Tuesday morning) looks promising!
Intellicast - Maggie Valley Weather Report in North Carolina (28751)
Ohhhh. So close!!!
Brake master brace and power bleed special
Get a more positive and solid feel with extra braking power with the Alpha master brace. The factory master cylinder flexes when you push your brake pedal. When the master flexes energy is lost. Show special installed with a full power bleed of your brake system is $150.00 installed! Give us a call or email/pm me to setup a appointment. See you all in a few days!