MeanSling interior liner kits - Feed back wanted.

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • MeanSling interior liner kits - Feed back wanted.

      Damn, @Ruptured Duck, I just got my floor mats from the wrong supplier. I'd have waited and ordered them from you. I was wondering if the trans tunnel pieces will be available as a kit?


      Sent from my iPad using Polaris Slingshot Info
      Michael West
      Gainesville Ga.
      404-401-0841

      :SLRSS: :COLDAIRSS: :MOTOROILSS: :OILFILTERSS: :00008862: :00008698:
    • Just so everyone is clear these will be secured into place with Velcro flaps at key locations and black snap fasteners. This does require screwing the male snap into the plastic panels. I have reduced the number and locations if snaps to the minimal amount. I hate fiscal changes to vehicles that cannot be reversed.
      This was a request made by many so that the liners could be removed easy and cleaned.
    • Thanks to everyone. Will be submitting a PO tomorrow and should have the first production run in about 8-10 weeks for the first batch. Need on final sample to sign off on and then we are a go. Thank you everyone for all the feedback.

      Here is a little sneak peak at another product I'm hoping to have at SSITS. I have wanted to do a hood extension ever sense I first got my SS. Others made it to market but I always felt there was a simple solution to be had. I have finished the first set of MeanSling prototype hood hinge extension brackets today and it's working wonderfully and also works in conjunction with the MeanSling hood lift assist strut. Not gonna show the details yet but when measured from the center windshield support bolt (one on the windshield) to the center of the hood I went from about 36" to over 52". That's over 15" of forward movement from stock. Should cost much less than current designs and also easier to install... (Yes things are covered... It's for good reason)
      Images
      • KIMG2411.JPG

        81.54 kB, 432×768, viewed 28 times
      • KIMG2413.JPG

        78.39 kB, 432×768, viewed 31 times
    • MeanSling interior liner kits - Feed back wanted.

      Ruptured Duck wrote:

      Thanks to everyone. Will be submitting a PO tomorrow and should have the first production run in about 8-10 weeks for the first batch. Need on final sample to sign off on and then we are a go. Thank you everyone for all the feedback.

      Here is a little sneak peak at another product I'm hoping to have at SSITS. I have wanted to do a hood extension ever sense I first got my SS. Others made it to market but I always felt there was a simple solution to be had. I have finished the first set of MeanSling prototype hood hinge extension brackets today and it's working wonderfully and also works in conjunction with the MeanSling hood lift assist strut. Not gonna show the details yet but when measured from the center windshield support bolt (one on the windshield) to the center of the hood I went from about 36" to over 52". That's over 15" of forward movement from stock. Should cost much less than current designs and also easier to install... (Yes things are covered... It's for good reason)


      I thought you were just cleaning as you go! Are you coming to Texas


      Sent from my iPhone using Tapatalk
    • DKF Texas wrote:

      Ruptured Duck wrote:

      Thanks to everyone. Will be submitting a PO tomorrow and should have the first production run in about 8-10 weeks for the first batch. Need on final sample to sign off on and then we are a go. Thank you everyone for all the feedback.

      Here is a little sneak peak at another product I'm hoping to have at SSITS. I have wanted to do a hood extension ever sense I first got my SS. Others made it to market but I always felt there was a simple solution to be had. I have finished the first set of MeanSling prototype hood hinge extension brackets today and it's working wonderfully and also works in conjunction with the MeanSling hood lift assist strut. Not gonna show the details yet but when measured from the center windshield support bolt (one on the windshield) to the center of the hood I went from about 36" to over 52". That's over 15" of forward movement from stock. Should cost much less than current designs and also easier to install... (Yes things are covered... It's for good reason)
      I thought you were just cleaning as you go! Are you coming to Texas


      Sent from my iPhone using Tapatalk
      @DKF Texas would love too but still not there yet. I know it's missed opportunity but schedules and day job will not allow it this year. 2019 should be the year.
    • MeanSling interior liner kits - Feed back wanted.

      Ruptured Duck wrote:

      DKF Texas wrote:

      Ruptured Duck wrote:

      Thanks to everyone. Will be submitting a PO tomorrow and should have the first production run in about 8-10 weeks for the first batch. Need on final sample to sign off on and then we are a go. Thank you everyone for all the feedback.

      Here is a little sneak peak at another product I'm hoping to have at SSITS. I have wanted to do a hood extension ever sense I first got my SS. Others made it to market but I always felt there was a simple solution to be had. I have finished the first set of MeanSling prototype hood hinge extension brackets today and it's working wonderfully and also works in conjunction with the MeanSling hood lift assist strut. Not gonna show the details yet but when measured from the center windshield support bolt (one on the windshield) to the center of the hood I went from about 36" to over 52". That's over 15" of forward movement from stock. Should cost much less than current designs and also easier to install... (Yes things are covered... It's for good reason)
      I thought you were just cleaning as you go! Are you coming to Texas


      Sent from my iPhone using Tapatalk
      @DKF Texas would love too but still not there yet. I know it's missed opportunity but schedules and day job will not allow it this year. 2019 should be the year.


      If you need to get anything to Kerrville let me know my niece lives close by there and has room


      Sent from my iPhone using Tapatalk
    • Well snow day here for me so I'll be working the second Job at MeanSling today. Will post final install images a little later. Minor changes for production to help with installation. Snap moved a bit and the addition of one more Velcro fastener.

      The tunnel covers can be installed without removing the seats. Passenger side OK but will recommend possible the driver's side (far easier) just because of limited space with the steering wheel. I will recommend removing the speaker pods just to make installation of snap fasteners easier as well. Mats and covers are removable and installable with everything mounted.

    Slingshotinfo.com is not affiliated with Polaris Industries the makers of Polaris Slingshot in any way.