Please watch our site in the next few days for finalized pricing on our new tow dolly kits. These dollies are built for completely knocking down for shipping and /or storage , all welding , drilling and bolting is completed by us then knocked down for shipping to keep consumer costs at a minimum.
After conferring with forum members, @scootertrash (many thanks) and @BKL who provided us with a detailed pdf showing all dolly designs known to date, We have combined ideas with our wheelifting experience to date, over 4000 miles, and determined as well as being able to swivel a good dolly design must keep the font spoiler as high off the ground and as close to factory heights as possible , to prevent potential damages, therefore our design unlike others, places the spreader bar on a 45 degree angle, behind the cradle tray , verses under it, allowing us to keep the tire cradle as low to the ground as possible, thereby keeping the front spoiler as high as possible. Only with our robust cradle design with 45 degree leading edges, suspended from an additional cross member, and placed right over the dolly tire centreline can we be confident that, as long as there is air in the tires, that cradle is never going to touch the ground ! And if it did, over steep rollover curbs in parking lots etc the cradle is constructed robust enough to simply skid that rear cradle tray with the additional cross member, and 45 degree construction throughout which greatly reduces impact loads over vertical post designs.
While shipping cost across the lower 48 WILL BE included in price the crate already measures 80 x 12 x 24 inches and weighs just under the maximum for courier services, therefore tires and rims are not included in kit as they would greatly increase crate size and cost of shipping. Another benefit to the consumer is U.S online tire sites such as ww trailer tires.com will sell and ship at a great savings verses us paying the much higher Canadain prices and then adding shipping. tires shown are 185 75R 13 to keep front spoiler as high as possible, however another option is 205 75R 14 which will raise the cradle height 1 inch but will lower the front spoiler one third of that inch. All safety chains ,tire straps, hubs and axles, hitch coupler,and loading ramp, as well as a recommended, for peace of mind, additional 4 inch strap that can be placed through the rim securing the Sling to the structural cross member, will be included in kit.
loading ramp, as well as a recommended, for peace of mind, additional 4 inch strap that can be placed through the rim securing the Sling to the structural cross member, will be included in kit.