Now that warranty is up I will have to do most repairs myself and wanted to find the best and cheapest place to order oem parts.
Where are you guys finding best ?
Thanks WS
Now that warranty is up I will have to do most repairs myself and wanted to find the best and cheapest place to order oem parts.
Where are you guys finding best ?
Thanks WS
Ebay
I am needing a fuse box and it looks like its only sold with a harness, any used ones around?
All my 4 wheel vehicles are GM and there are several GM wholesale or so they claim part sites..
The fuse box is not a GM part.....
I am needing a fuse box and it looks like its only sold with a harness, any used ones around?
Are you replacing your factory one or are you looking to add one that looks like It? Littefuse makes a model that looks very similar to the factory unit and even uses the same wire connectors underneath and same type of fuses, relays, etc....I can look back in to it more if you are interested.
From my research the fuse box does not have a part ID number...it only comes connected to the main wiring harness.... $1,100 +
Here is a motorcycle salvage yard....
Used Motorcycle Parts, Motorcycle Salvage Yard, Used ATV Parts, Used UTV
Parts
What happened to your fuse box that it needs replaced?
Are you replacing your factory one or are you looking to add one that looks like It? Littefuse makes a model that looks very similar to the factory unit and even uses the same wire connectors underneath and same type of fuses, relays, etc....I can look back in to it more if you are interested.
I am wanting to replace the oem fuse box, Tric Led wired a headlight cutoff switch into my box using the two prong wires to replace the fuse. I assume it arced in the box melting the fuse socket. I was able to clean it up and get it working properly but want to replace the box. I am thinking the wires just plug into the bottom of the box?
I think I found one, so thanks for all the advice.
I am also needing a new battery box lid as my was damaged at the slot tongue.
I am also needing a new battery box lid as my was damaged at the slot tongue.
Greg, what was YOUR slot tongue doing near your battery box lid anyway?
I am wanting to replace the oem fuse box, Tric Led wired a headlight cutoff switch into my box using the two prong wires to replace the fuse. I assume it arced in the box melting the fuse socket. I was able to clean it up and get it working properly but want to replace the box. I am thinking the wires just plug into the bottom of the box?
I think I found one, so thanks for all the advice.
I am also needing a new battery box lid as my was damaged at the slot tongue.
Yes, it all just plugs in the bottom. You will need a very small flat head screwdriver to release the lock tab of each wire or this tool:
p_804412.h_810947.r_IF1003?mkwid=sc9nzWzMA&crid=38094426869&mp_kw=&mp_mt=&gclid=CO68g_afrNQCFRmHswodPywFYQ
Works for releasing the wire lock tabs for most of the weatherproof connectors on the Slingshot as well.
Here's a wreck one might have wiring harness
15 Polaris Slingshot Engine Motor GUARANTEED Ecotec 2.4L LE9 DWW GM | eBay
Thanks for all the info guys. @TravAZ found a used one for me. I installed it over the weekend. Each pin drops out from the bottom of the fuse box so it's time consuming.
Sent from my iPhone using Tapatalk
I am glad I could help you find one. And, I am equally as glad that I didn't have to help you swap them.
That job looked miserable...