AT SSBODYKITS.COM we,re always looking for the next best mod to fabricate, and after discussing with a few guys on another thread, MiM @AllIn5450 @Ross @Neosolidus, Funinthesun @ Irobbi @kenny-h some are looking to change that "mustache look" someone tossed out this one off custom photo and asked if it was doable? ABSOLUTELY (at least something similar) ! the big Question I have is, is there a market for it? What do you guys think ? Please chime in, I,m looking for feedback, is this a mod you could see yourself purchasing ? The two new round air inlets (or something similar) on each side could be functional as in directing, ducting air for brake cooling. Any input is appreciated, Still just tossing around ideas, so no pricing has been firmed up yet, but painted and delivered , it would have to run at least a grand, but certainly not two ? Don't be shy, I have broad shoulders lol.
THE NEXT MOD ? ....WOULD YOU BE INTERESTED IN A FRONT END LIKE THIS?
-
-
AT SSBODYKITS.COM we,re always looking for the next best mod to fabricate, and after discussing with a few guys on another thread, MiM @AllIn5450 @Ross @Neosolidus, Funinthesun @ Irobbi @kenny-h some are looking to change that "mustache look" someone tossed out this one off custom photo and asked if it was doable? ABSOLUTELY (at least something similar) ! the big Question I have is, is there a market for it? What do you guys think ? Please chime in, I,m looking for feedback, is this a mod you could see yourself purchasing ? The two new round air inlets (or something similar) on each side could be functional as in directing, ducting air for brake cooling. Any input is appreciated, Still just tossing around ideas, so no pricing has been firmed up yet, but painted and delivered , it would have to run at least a grand, but certainly not two ? Don't be shy, I have broad shoulders lol.
Or real cold air induction
-
I want one. I called the company about it and they said they made one, it was a long time ago but have no plans to make any more
-
I want one. I called the company about it and they said they made one, it was a long time ago but have no plans to make any more
YES, I basically got that response in a round about way too , so I,m thinking its open ?
-
YES, I basically got that response in a round about way too , so I,m thinking its open ?
Where do I send my money? I'm in for one
-
But I,d still like to personalize my mold a bit ?
-
Where do I send my money? I'm in for one
Lmfao, heh still just tossing around ideas here ! but Seriously if there,s enough interest I would tool up, but its at least a thirty day venture and not sure I could get more than one week into it before M.V
-
But I,d still like to personalize my mold a bit ?
You mean you don't have any made yet? I guess I can wait,....2 weeks!
-
one of the guys on the dark side just had a good suggestion, ducting from one of the ram air inlets directly to the cold air intake box, and closing off the box from engine compartment air would then actually give the added benefit of ram air pressure to the CAI as well
-
add me.to the list... Those inlets look like they were made for The TWINS...
-
Nice... A grand though... It's gonna be awhile for me!
-
I would gove this some serious consideration if i screwed up my existing front end.
You know..... deer, debris, just about anything.
If i need to fix it, I would pay the "betterment" fee, the difference between stock replacement and this mod. My insurance is good that way
-
one of the guys on the dark side just had a good suggestion, ducting from one of the ram air inlets directly to the cold air intake box, and closing off the box from engine compartment air would then actually give the added benefit of ram air pressure to the CAI as well
yea, wouldn't help with me. I have a couple extra holes in my hood When you have a price and design let me know please. I want one
-
I would gove this some serious consideration if i screwed up my existing front end.
You know..... deer, debris, just about anything.
If i need to fix it, I would pay the "betterment" fee, the difference between stock replacement and this mod. My insurance is good that way
Yah and I,d bet the new Polaris parts even though a lot less complex would be a lot more money , lol
-
@kev, that pic shows an entire lower front end replacement, hence the high price. Some will sell at that price point but you'd probably sell more with just a cheaper fill-in option - one for drivers side & one for passenger side (pieces that fill in the void areas between the existing lower dam & the headlights). Personally, I'm looking for filler pieces. @lrobbi came up with a nice look, maybe he'll post up here again. Maybe have both options? JMHO...
Here's an example - something along this idea but your own design:
-
Wow @Shatneyman that is cool ! I will certainly keep you posted, with all that snow I had to check your profile to see if you were a fellow Canuck , but heh, with the Winters you guys have been getting in Vermont you might want to come to Ontario for warmer weather ! lol
-
-
@kev, that pic shows an entire lower front end replacement, hence the high price. Some will sell at that price point but you'd probably sell more with just a cheaper fill-in option - one for drivers side & one for passenger side (pieces that fill in the void areas between the existing lower dam & the headlights). Personally, I'm looking for filler pieces. @lrobbi came up with a nice look, maybe he'll post up here again. Maybe have both options? JMHO...
Here's an example - something along this idea but your own design:
Heh @Tripod that's a good idea, Now you got me thinking ,,,,,, maybe when developing the prototype the sides of the plug could be used for a detached version that could be available as another option !
-
@kev, that pic shows an entire lower front end replacement, hence the high price. Some will sell at that price point but you'd probably sell more with just a cheaper fill-in option - one for drivers side & one for passenger side (pieces that fill in the void areas between the existing lower dam & the headlights). Personally, I'm looking for filler pieces. @lrobbi came up with a nice look, maybe he'll post up here again. Maybe have both options? JMHO...
Here's an example - something along this idea but your own design:
Exactly if you make a simple fill in that you can sell for couple hundred buck i bet you can sell a lot of them, I know i am beating a dead horse posting the picture but to date this is my favorite front end.
It doesn't change the look, just finish it.
-
Wow @Shatneyman that is cool ! I will certainly keep you posted, with all that snow I had to check your profile to see if you were a fellow Canuck , but heh, with the Winters you guys have been getting in Vermont you might want to come to Ontario for warmer weather ! lol
would it help to say I know the Canadian anthem and I love hockey?