Is this an easy install, and is there more than one Flosser model.
Thanks
@slingking did a video I do believe!!
Is this an easy install, and is there more than one Flosser model.
Thanks
The horn requires dedicated power and can't be run from the aux fuse box (horn needs higher amps) that many have installed.
It is a relatively straightforward install, plugs into current horn harnesses.
The hardest part for me was monkeying around with the battery box and the power connections.
This Fall, I plan to put in the aux battery jumper terminals and move the horn and LED power cables from the battery to the aux battery terminals.
installed flosser from slingmods in may of 16. Just quit working. 25 amp fuse is good and the oem horn still works via the flosser wiring. Any ideas?
flosser comes with wiring harness that the oem horn also is connected to.
I agree with @Live-a-Little!. I had a similar issue with my Flosser Horn. I had the stock horn sound but no Flosser sound. It turned out that one of the two wires that connected to the bottom of Flossser horn had somehow disconnected itself. Could have been caused by hitting a bump in the road or some other way. Once it was reconnected, it worked. I have now added a horn test before I start out on any rides, because I really can't stand the wimpy stock horn sound. 
Flosser horn is okay when the Polaris service person replaced my J case he wired my heater clothing and flosser horn all together and put a 15 amp fuse between that and the battery stupid! so when I used the heated clothing and horn the 15 amp fuse blew. Removing the 15 amp fuse they put in tomorrow and going back direct to battery.
Horn and harness at half the price from Amazon.
ref=sr_1_4?ie=UTF8&qid=1509230331&sr=8-4&keywords=air horn for car
already have the harness I bought from slingmods. problem was when they replace my jcase they put my air horn and heated clothing on the same circuit with a 15 amp fuse to the battery. they should not have done that I had it wired perfectly myself and never had a problem
Removed and all is working again. Heated jacket liners will cook you on high now. They have their own 15amp fuses.
@EricRedSL I like the idea of a separate circuit for the heated gear. SS electrical system seems fragile
Heated gear comes with a harnesses that hooks directly to the battery...
@Bigdog agree it comes designed to hook to battery, but I like the idea of routing through a fuse block.
I just said that to let everyone know it needs hooked up that way. But I’m going to wire mine to an aux fuse box. I’m done running wires back to the battery for every new mod. I ran a big fat one up front to the new fuse block as thick as the battery cable. I can power my house from the SS now. LOL
