Does anyone know a source for clamps like this or similar?
Plexiglass clamps
-
-
I wish I did. Would love to hear from someone that does. I can get Tuff Pak from a company named General Rubber & Plastics that is based out of Louisville Ky. Years ago Tuff Pak was what Nascar windows were made of. These folks have made me many motorcycle windshields over the years for pennies on the dollar. If someone chimes in with a place to get clamps, I can make my own Baker Air Wings really cheap.
-
Maybe reach out to Baker Air and ask what clamps they are using?
I will see if my google'fu is working this morning and assist.
-
The style clamp is "set screw clamp"
Still digging.
-
The style clamp is "set screw clamp"
Still digging.
Awesome. Thanks.
-
following with interest as I was unable to previously locate
-
I found some clamps that might possibly could work... but nothing even close to what baker air wings is using.
Search ebay for adjustable motorcycle windscreen. Some can be had for ~$30 and re-use the clamps they have.
Otherwise no dice.
-
As close as I could find...
Would require modification. -
As close as I could find...
Would require modification.This is close and gave me an idea. My plexi place can get clamps and grommets to go in them to. I will have to table this idea till mowing season is over. Busy Busy. But I will have a finished product of this before Thanksgiving and have it on the serious cheap.
-
Could always get creative with these
7" Adjustable Friction Articulating Magic Arm+Rod Clamp for DSLR Monitor T4M0 | eBay
-
Could always get creative with these
7" Adjustable Friction Articulating Magic Arm+Rod Clamp for DSLR Monitor T4M0 | eBay
.
"Adjustable Friction Articulating Magic Arm+Rod Clamp"
Geeez I miss @Tripod ............
. -
Found this - B06X3TS89H. The clamp part can be removed for other use.
-
I think I’m going to make some wing deflectors and use yellow plexiglass.....my bad eye is on the driver side and headlights really star out. Maybe the yellow will cut down on the staring factor.
There is a good bit of wind coming around the ends of my straight factory windshield....
I decided to use the roof uprights instead of putting using the windshield to eliminate stress on the windshield.