Our WP Dual Outsider will be available June 1st!! We will be vendor at slingshots in the smokies so stop by and see it ,hear it or to let us install it on your slingshot!!!
slingshotinfo.com/wcf/index.php?attachment/3799/
Check it out...WP Dual Outsider...available June 1st
-
-
This is nice! It will also keep those who may have been on the edge about buying the crappy Corbin saddlebags from making that mistake!!
How does it look underneath?
-
OK. Now that is smooth. It fills up the area in the back and just looks sporty. Looks like a sport bike. Two thumbs up.
-
I have to ask. Have you got a ballpark price. I see two sport bike style silencers and alot of stainless so I'm prepared for a big number.
-
Underneath it is tucked nicely but tightly above the frame rails so there's no ground clearance issue it's also had a wrapped in areas where it is tight fittment .
I have some underneath pictures of "The Outsider" on the website. This system follows the same path.Price. $1495
-
I see two sport bike style silencers and alot of stainless
From elsewhere:" it is a 2" aluminum coated steel it travels through the drive shaft and It is completely wrapped in heat wrap, as it exits the tunnel it coverts to stainless steel then a few more bends to a Y pipe finally to the dual Hot Body mufflers."
.
How does it look underneath?
............
-
Nice! I like it a lot. I wish you offered it to fit the Hahn turbo setup. I would be on that in a heartbeat. It's the style of exhaust that I like. And it's priced in the same neighborhood as a sport bike full exhaust.
Don't get me wrong. I love my side exhaust. But it's all about what "I" think is awesome. And this checks the box on AWESOME!
-
super hot looking.....
-
I'm so getting this hehe can't wait
-
Is there a video of the exhaust system attached and working on a slingshot, so we can hear what it sounds like... as far as the look it's great....
-
1. Will this work with the Assault fender?
2. I have the Alpha turbo side exit exhaust. How would this work with that? -
@ss-lrv There is a clip on my website as well as a few more others on YouTube. Just search welter performance and it will take you to them.
@Crusher I'm unsure about working with the fender. I haven't tried it yet. This system connect directly to stock manifold or 1320 header. I will have a turbo models available immediately after this one gets off the ground! Probably about mid June !
-
.
Curious if you have reached out to the turbro manufacturers regarding necking the exhaust down to 2" right at the turbo outlet .....
Might be a whole lot of wasted work if you don't do that first....
.
-
@Orangeman c'mon give me a little more credit than that! I'm totally aware that a 2" exhaust won't supply a turbo! For X amount of hp requires X amount of flow. Anyways , I got ya covered just hold tite!!!
-
.
Well, you do claim a NA 15 hp increase with a long run 2" exhaust ... so gotta keep an eye on you...
.
-
Fair enough
-
@ss-lrv There is a clip on my website as well as a few more others on YouTube. Just search welter performance and it will take you to them.
@Crusher I'm unsure about working with the fender. I haven't tried it yet. This system connect directly to stock manifold or 1320 header. I will have a turbo models available immediately after this one gets off the ground! Probably about mid June !
This is the cleanest and best rear exhaust outside setup I have seen to date. It looks real sporty and fast. It is to bad many of us have turbos where this will not work yet. When you are ready to develop a setup for the turbo guys, it would be nice if it could be connected off of the up front side exit exhaust or cutting off the exhaust pipe before it gets to the side and run to the back. After that running the pipe out and having real nice stainless or chrome extensions (large where it resembles mufflers) could be cool. Also keep in mind of us folks who have rear fenders so the system will work with or without them. Again, congrats on a nice setup and I am looking forward to seeing it at SSITS.
-
I am looking forward to being one of the first to have this installed in Maggie Valley... right Jeff? So if anyone wants to see, hear, feel it feel free to look me up. I will be the one with the cool new exhaust with the crowd around me.
-
If you tour the Bush Bean Factory (& heavily partake of their wares), those crowds will rapidly dissipate...
-
@ss-lrv There is a clip on my website as well as a few more others on YouTube. Just search welter performance and it will take you to them.
@Crusher I'm unsure about working with the fender. I haven't tried it yet. This system connect directly to stock manifold or 1320 header. I will have a turbo models available immediately after this one gets off the ground! Probably about mid June !
It does look sporty. I am with Rab on this. Now with a rear fender I will be watching to see if it will work ? Looks like I need to start saving again!