wokka and 4 others like this.
Trooper likes this.
EjFord and Trooper like this.
EjFord likes this.
EjFord and Trooper like this.
EjFord likes this.
neverenoughtime and Trooper like this.
Trooper likes this.
EjFord likes this.
Trooper and EjFord like this.
Trooper and 3 others like this.
Trooper likes this.
Trooper and OrangeSlingFL like this.
EjFord likes this.
To the guys orderibg directly from Polaris, where are you placing the order?
I didn't order from Polaris but if you do, keep in mind that you can't do the center light without getting an aftermarket bracket and the nosecone has to be modified. The catch is, to do that, the hood must come completely apart!
I didn't order from Polaris but if you do, keep in mind that you can't do the center light without getting an aftermarket bracket and the nosecone has to be modified. The catch is, to do that, the hood must come completely apart!
i think im just going to go with the side headlights only and keep the stock ones intact so not so worried about that. Polaris price is around $350 total for brackets and LED lights so thats a good price.
i think im just going to go with the side headlights only and keep the stock ones intact so not so worried about that. Polaris price is around $350 total for brackets and LED lights so thats a good price.
The center light alone is $329!
i think im just going to go with the side headlights only and keep the stock ones intact so not so worried about that. Polaris price is around $350 total for brackets and LED lights so thats a good price.
That is a good price. did you have to go through a dealership?
The center light alone is $329!
Im referring to upper side housings and LEDs . Its true center set up is the pricies but im not planning on paying UAS prices for oem parts thst can be ordered in dealer for cheaper.
That is a good price. did you have to go through a dealership?
I believe that's just for the uppers (light $65, bracket $118) are the price list costs, per side.
That is a good price. did you have to go through a dealership?
havent ordered yet but i have a contact at a dealer in PA that can get the parts. Ill post youtube video of guy that did it here
Thanks OrangeSlingFL and maverick5990 I will contact my dealer and see what they have to say. I already have the UAS ones but the factory look is always much better.
This is the video. Note he only installed the upper SIDE housing and lights but he gives details on how to do it and where he got them in the comment section of the video as well as what to expect on prices.
Im referring to upper side housings and LEDs . Its true center set up is the pricies but im not planning on paying UAS prices for oem parts thst can be ordered in dealer for cheaper.
I did buy at the introductory price and i stimulated the economy! One thing that I do like about the UAS set-up is that the DRL's are wired to the turn signal circuit and flash white and amber for better visibility. It had moments during install but looks good now!
Are the Canadian lights different for the 2020?
They don’t use the center lights and those are the ones we use to see to drive.
Sent from my iPhone using Tapatalk Pro
Are the Canadian lights different for the 2020?
They don’t use the center lights and those are the ones we use to see to drive.
Sent from my iPhone using Tapatalk Pro
Don't take this to the bank, but I don't believe the headlights changed on the Canadian version. They didn't go for the center lights on the 2015's! I just checked the 2020 parts list and the Canadian didn't change.
Please correct me if I am wrong but from what I have read you can modify the factory nosecone without tearing the hood apart. The headlight or gap fillers will be my next mod. I just used factory oem parts for the upper drl’s.
Yeah, you can trim the nosecone without removing it, just need a careful hand.
So I am guessing you just trim the backside because it touches the light? Any idea how much?
Sorry, I should have put the UAS nosecone next to the old one and took pics/measured, but I didn't think about it.
If you want, I can try and do some close up pictures of it, showing the hood so you can compare.
Will grab them tomorrow.
So I am guessing you just trim the backside because it touches the light? Any idea how much?
Before you go trimming, do you have the bracket that you need to mount the center light?
No problem wokka, I messaged slangshot7 because he kept the factory nosecone. He did so because he did not want to tear his hood apart either.
What was today's Sling project-Mods , goodies....?
I remember when I took off my hood inserts to install the painted blk pearl inserts and they were a pain to pull off. Think I broke just about every one of those tabs on those textured blk inserts lol. I do not want to take a chance on breaking these painted ones.
Maverick I do not have that bracket yet, there are only two companies that I know of that make that bracket. Just trying to decide if I want gap fillers next or headlight. Thanks again for all the information.
Yeah, great thread... I like my custom clover lights, but those 2020 drls look mean... Maybe I'll move a pair of the clovers to replace the center lights... 🤔
