Ok ok you got me hooked....now where do I order?
SSREAP
Ok ok you got me hooked....now where do I order?
SSREAP
Do I have to strip the WHOLE HOOD to get that little center section out??? I want to do mine in the famous CF dipped Purple!
[/quote]
Styln you know we have you covered!!! We have two options one with a copper colored thread and one with a melamine interwoven.
Styln you know we have you covered!!! We have two options one with a copper colored thread and one with a melamine interwoven.[/quote]
OHHHHHH You know I like the second one with the non gold look!!! Thats saaaaweeeet!
When you are good to go will you post a link, I am going to sell a kidney in the morning so I can get started ordering as soon as you can take orders
We are working on the website right now as we speak. Also trying to get pricing to Together for you guys to give you the best price possible it's probably going to be right about the same price as hydroDipping.
Another thing we are working on is packages just hood inserts and another package with hood inserts nose and rear humps the Dashboard will be a separate.
Ok ok you got me hooked....now where do I order?
SSREAP
We should be ready to take orders by the end of the week.
I'll be looking forward to seeing all you have to offer!
SSREAP
Will you be doing the front chin spoiler? Sorry if I missed it or you called it something else.
Will you be doing the front chin spoiler? Sorry if I missed it or you called it something else.
we can do it it just drags the ground a lot and the edges will get damaged we were thinking about trying one with a hard cut off line about a half inch from the bottom but I'm not sure how it will look.
Yes hopefully by the end of the week we will have the website up and going to start taking orders. Like TX Slingshot stated we want to keep this affordable and we both have other obligations but after a few months of planning we think we can aim to please and start getting these out soon.
As he stated previously we want to keep this as comparable to hydro-dipping cost wise as possible.
I already sold one and both testicles! Now I have $75000.00 to spend!
I got 1500.00 for the kidney and the rest was testicles....can you believe for those they pay by the pound!!!!!
SSREAP
what good is a SS without Balls.....lol
I already sold one and both testicles! Now I have $75000.00 to spend!
I got 1500.00 for the kidney and the rest was testicles....can you believe for those they pay by the pound!!!!!
SSREAP
I just can't seem to part with mine for upgraded brakes yet.
We will be posting pictures of carbon fiber speaker pods here soon. Doing both sides of the pod will allow a little to show on the outside for a nice accent. Shown above is a vinyl piece of carbon that I put there awhile back to keep shoe scuffs off the paint.
This is a hydro dipped red and black gas cap (courtesy of DKF) next to a carbon fiber red and black gas cap. They both look awesome and have different characteristics.
we can do it it just drags the ground a lot and the edges will get damaged we were thinking about trying one with a hard cut off line about a half inch from the bottom but I'm not sure how it will look.
I was thinking have front lower done then also adding. A lower splitter below that. @MACAWS has one on his. See if we can get him to post a pic of his. Trying to get Metricks to get me one color matched on the top instead of carbon fiber but carbon fiber would be ok too. They are a little leary of this for obvious reasons.
I was thinking have front lower done then also adding. A lower splitter below that. @MACAWS has one on his. See if we can get him to post a pic of his. Trying to get Metricks to get me one color matched on the top instead of carbon fiber but carbon fiber would be ok too. They are a little leary of this for obvious reasons.
His is in the MACAWS BUILD on the blog thread if you wanna see it!
@JimM here are the pictures you requested. I love the real carbon fiber but would caution doing the entire front wing only for the reason that it has a real nice deep clear finish and that part of the bike gets beat to hell with road rash. That is the reason for the black vinyl kit on my upper parts it makes them look more like the lower black plastic part. My Spoiler in the rear takes tons of polishing to keep it looking good. Just my opinion you know me I am anal about polishing everything. The black plastic cleans up easy and doesn't show chips.
We also have a range of colors we're working closely with the manufacture of this carbon fiber to make sure that we can customize your slingshot in your style so you stand out apart from everyone else.
Orange
Blue
Green
Reflections read
Also have a variety of patterns.
I have a whole bunch of samples on the way so I will be making them next week to show you what it will look like after epoxy.
slingshotinfo.com/wcf/index.php?attachment/697/
slingshotinfo.com/wcf/index.php?attachment/694/
slingshotinfo.com/wcf/index.php?attachment/696/
slingshotinfo.com/wcf/index.php?attachment/695/
I can't wait to get some of this stuff - sent an email the other day
Macaws are you going to beat me to the punch!!!
- Let me know what you guys think.
This part is not finished it still needs two more coats wet sand and clearcoat. This carbon fiber is 12X 10 1/2 ounce.
[/spoiler] I want that piece where the middle lights are... That is SWEEEEET
@MACAWS Thanks for posting the pics. Looks great by the way. Have over 10000 miles so far from April to November before we put it away for winter. Fortunately for us we haven't had any issues with paint chips. Did drag once because of my stupid decision to try and beat oncoming traffic into parking lot. Won't ever happen again. I'll drive all around a parking lot just to miss the speed bumps. As far as a front lower spoiler goes I would like one like yours made from whatever abs plastic for all I care and either color matched painted on top or Carbon fiber. That way if you do drag the front bottom would be black so not so much concern.