Here are some pics so everyone can see the LED's are liquid proved "water, vodka cola with ice even beer) +
Just an Idea for blinker and brake lights.
-
-
Are you sure that last picture is beer?
-
Are you sure that last picture is beer?
Yes Coors extra gold, weak beer not like in Germany
-
It works!! Got my sequential turn signals in place. A bit of cleaning and wire tidying up to do in the morning. $40 for everything, with 12 of the lights as yet unused. Bought a pkg of 20 (10 amber, 10 red) 3/4” marker lights off eBay for $16 and a pair of 4 step sequential flasher controllers for $19 (also eBay). A couple of terminal strips and a project box I had laying around was all that I needed. I am pleased with the results.
-
YouTube link of my right side turn signals. The bright white flash is from the led turn signal light on the mirror.
https://youtu.be/BOj6UylwIm4 -
-
@mytoy, did you weld those lights in place?
Please explain what you mean with welding in place
-
Plastic welding.
https://m.youtube.com/watch?v=HvV9a3lEe2g
Not the LED lights the black plastic....they are mounted in...
-
Plastic welding.
https://m.youtube.com/watch?v=HvV9a3lEe2g
Not the LED lights the black plastic....they are mounted in...
Are to talking about the LED'S I use? Otherwise it douse not make sense to me. If you are revering to the LED'S I purchased them like this.
-
It works!! Got my sequential turn signals in place. A bit of cleaning and wire tidying up to do in the morning. $40 for everything, with 12 of the lights as yet unused. Bought a pkg of 20 (10 amber, 10 red) 3/4” marker lights off eBay for $16 and a pair of 4 step sequential flasher controllers for $19 (also eBay). A couple of terminal strips and a project box I had laying around was all that I needed. I am pleased with the results.
Bottom right picture....did you plastic weld them in place?
-
Not welded. Lights come with grommets (see first pic). Drill 3/4” holes and push them in.
-
I have the lights already but I’m looking at what the lights are mounted in...it looks like black plastic pieces you cut to fit in the square openings....and it looks like the plastic was welded in place...it looks like a bead of weld around them...
Or is it silicon caulk...
-
I drilled the holes directly in the inner fender. No glue, welding, caulking or inserts.
-
I was thinking those openings went straight through......that makes it pretty easy to install LEDs.
-
I was thinking... Another forum first!!!
There, fixed it for ya’...
-
I'm just glad we have just such a great Forum when someone comes up with an idea everyone can make it there own, I mean it in a positive way. This is what we do it is sharing.
-
There, fixed it for ya’...
What the.....
-
I just mounted the side AMBER LED'S, I'm in progress of making the angle brackets for the red LED's then powder coat(just received the system and the oven) waiting for the powders. Not sure yet if I go with black or candy red, I'll try both I guess. The whole thing will be IPX7 waterproofed.
-
Looks good.....Is there room to mount those lights in here?
-
Looks good.....Is there room to mount those lights in here?
It would be tight, plus you would eventually blind traffic because it is angled up.