Disclaimer - (The following DIY project is purely “at your own risk”. As with any DIY project, unfamiliarity with the tools and process can be dangerous. Posts should be construed as theoretical advice only.
If you are at all uncomfortable or inexperienced working on these projects (especially but not limited to electronics and mechanical), please reconsider doing the job yourself. It is very possible on any DIY project to damage your ride, void your warranty, create a hazardous condition, or harm or even kill yourself or others.)
There is more than one way to add a back-up camera to the Slingshot. This is just the way that I did and it has been working flawlessly for 6 months now.
You will need a 30A SPDT relay. I may have gone overboard, but wanted something waterproof. Below is what was ordered:
http://www.amazon.com/HELLA-00…=oh_aui_search_detailpage
http://www.amazon.com/HELLA-H8…=oh_aui_search_detailpage
At each tail light you will find a solid white wire which is your reverse trigger wire. This wire provides a negative (-) output unlike most vehicles that have a positive (+). This is where the relay gets involved as we need to change that polarity.
Here is a quick diagram of the (SPDT) Relay wiring:
I pulled 12v ignition power for the camera from the main harness behind the dash. As I was already running an RCA for the camera it was an easy spot to get power when wiring up the Stereo harness.