anybody know how hard to remove the hood to be able to work on the front easier
removing hood
-
anybody know how hard to remove the hood to be able to work on the front easier
it is in the DIY section. Also how to take everything apart
-
A thread from TDS:
https://www.slingshotforums.com/threads/hood-removal.165889/
and, from the service manual: -
anybody know how hard to remove the hood to be able to work on the front easier
Install a set of these while you have the hood off...
May never need to remove the hood again.
-
Be sure you have a friend to help.
It's not that heavy, but it is awkward as heck!
-
We have a billet hood hinge kit in stock you can install while you're at it that will allow you to open your hood nearly vertical. Our kit is superior to others on the market in the fact that we redesigned the top and bottom brackets to keep the angle geometry near enough to stock, that it doesn't require a hood assist shock to open the hood. It will open just like it did from the factory. You can check it out here https://zzperformance.com/coll…hot-billet-hood-hinge-kit Fits all models 2015-2020
-
anybody know how hard to remove the hood to be able to work on the front easier
Not sure where you are trying to get to in the front, but when we have Slingshots come in that do not have our hood extenders on them, we do the "poor man's" hood extension while working in the engine area. I just posted up some quick instructions on how to do it -
Hope that helps,
Dave
-
Be sure you have a friend to help.
It's not that heavy, but it is awkward as heck!
And don’t slam the hood down in place!!!!!!!!
