Does anyone know a source to get these screws by the box? $2.95 each is a little steep. I wouldn't mind being able to buy a box of all the screws we need.
SCREW, M6 TXBH
7520011
Does anyone know a source to get these screws by the box? $2.95 each is a little steep. I wouldn't mind being able to buy a box of all the screws we need.
SCREW, M6 TXBH
7520011
If you have a local Fastenal, I was able to get 100 qty of some special drawer screws, over the counter. They had to order, but had them in a couple days.
FWIW
Go to local whorehouse! Ask for group rate!
It had to close down the girls were worn out
I found one parts dealer has them for $1.50 still a little steep
If you have a local Fastenal, I was able to get 100 qty of some special drawer screws, over the counter. They had to order, but had them in a couple days.
FWIW
Thanks flipr, there is one about 6 miles from me...I'll let you know what I find out..
@bjk81... You and me... It's like you're reading my mind...
The nuns would be very disappointed in you....
The nuns would be very disappointed in you....
Because I wouldn't be able to satisfy them all? Try me!
Because I wouldn't be able to satisfy them all? Try me!
Aaaand that's when the convo switches to the NSFW section...
Be careful when ordering bolts. Black Oxide most commonly sold and supplied to hardware stores will rust very quickly. Finding the correct black corrosion resistant coatings in metric hardware is hard to find and will not be as cheap as you might think. Best and least expensive alternative will be quality stainless steel hardware. This can be ordered from a number of suppliers.
Check this site out. Should be able to find just about anything you want on here.
McMaster-Carr
Be careful when ordering bolts. Black Oxide most commonly sold and supplied to hardware stores will rust very quickly. Finding the correct black corrosion resistant coatings in metric hardware is hard to find and will not be as cheap as you might think. Best and least expensive alternative will be quality stainless steel hardware. This can be ordered from a number of suppliers.
Well now that might be the reason they are so expensive. There never seems to be a cheap way to do things to our SS. I already had one fall out so I want to have some extras.
Polaris buys them in bulk so I thought there may be a supplier that has them by the box
Another update...f
If you have a local Fastenal, I was able to get 100 qty of some special drawer screws, over the counter. They had to order, but had them in a couple days.
FWIW
I stopped in to ask about the screws I want (our 40 torx body screws) and he said he could not order them... he showed me some genetic ones of the same thread ...without the special coating...without the stepped shoulder...and without the nonthreaded tip.... you have to use the Polaris screws.