Here it is all fixed up.....
Stupid question, did you take the weight off the tire to move the nut up, or did you wrench it against the spring while on the ground?
Here it is all fixed up.....
Stupid question, did you take the weight off the tire to move the nut up, or did you wrench it against the spring while on the ground?
Take the weight off. Much easier that way...
So what would be baseline? What height is correct? Does your riding style influence or belt tension?
Riding style doesn't dictate belt tension. It should be a standard rate no matter how tight or loose you set your suspension. Once you set your spring tension you would adjust the belt tension to it.
How's that for a picture of the problem. I actually took that picture in Panama City Oct 18th.
You were in pc and did not let me know , I am only an hour east , l would love to see and get a ride in your sling
I go to both Thunder Beach events each year. I stay from Tuesday to Sunday.
Let me know when that is next would love to meet you
Let me know when that is next would love to meet you
sure will... look forward to it..
As per conversation with Bill Hahn for stock height you should have 1 3/4 inch of thread shown on front and 1 inch thread shown on rear QA1s.
As per conversation with Bill Hahn for stock height you should have 1 3/4 inch of thread shown on front and 1 inch thread shown on rear QA1s.
That would be correct if your running Hahn's default choice for spring rates on your coil overs. Some have heavier springs and some have softer springs... Main thing on the front is to make sure you are ok with the ride height and handling and lock the adjustment down. And in the back you want to do the same. However once your happy with the ride height and handling and have locked the adjuster nut down on the rear you should check and adjust your belt tension to whatever the factory specification should be. Because any up or down adjustment in height will have an effect on belt tightness.
I'll just have someone more knowledgeable than myself take a look and fix it... Might not be until April SSITTHC when Alpha can see it...
As per conversation with Bill Hahn for stock height you should have 1 3/4 inch of thread shown on front and 1 inch thread shown on rear QA1s.
ThankX!