I'm not seeing why they sent two. Did I miss something?
I know where those Alpha boxes were headed!
-
-
Here are pics of the location and the route for the hose.
here's mine it looks like my oil return line has a different route goes toward the muffler then forward. Was installed by Alpha.
-
The rubber grommet is on the pipe portion on mine not on the metal bracket that bolts on. It was a bitch to push that sensor into the grommet too.
-
Ok. I don't know where the second grommet goes. But I have the sensor in the spot with a grommet and I have the two allen bolts tight. And guess what. It took a little finessing. But this pipe is in. And it looks pretty good.
-
Did you drill out the little hole on the plastic intake manifold to prevent smoking while idling?
-
Did you drill out the little hole on the plastic intake manifold to prevent smoking while idling?
What the HELL!!
No. I was depending on my rings to seal off....
-
-
Seriously. Are you screwing with me???
-
The rubber grommet is on the pipe portion on mine not on the metal bracket that bolts on. It was a bitch to push that sensor into the grommet too.
Tony to the rescue...way to go! It's good to give a helping hand, you da man "T". After the oil pan RT can get this kit running and boosting like yours
-
Why shit no. I don't have ANY instructions.
-
I did mine since I had it in pieces already. Maybe you do not need to worry about that if they didn't include that in your instructions.
-
Do you mind posting all the little details and manuals. I would greatly appreciate it. I will buy you a steak dinner and a cold beverage when we meet.
-
Why shit no. I don't have ANY instructions.
I'm sure they didn't want to insult you with instructions since you could do this with your eyes closed.
-
I did mine since I had it in pieces already. Maybe you do not need to worry about that if they didn't include that in your instructions.
I don't have ANY instructions. Im sure my kit is special since it is a hybrid system that they are putting together for people with other brands already installed. And he did say that he was in a hurry to get it to me so I could have it installed before the Ozarks event. And I'm sure it didn't help that he couldn't consult with me before he sent it out. I guess that is one tiny downside of surprising someone with three boxes of goodies.
Let me refer you to my instructions again!
-
-
I appreciate the kind words about my skills but I am bowing down to the Alpha brothers and sisters now. Please anybody that has detailed pictures of this install post them here in this thread. I can turn wrenches with the best but how could I possibly know to drill a tiny hole in my intake!!!
-
-
Seriously. Are you screwing with me???
Troy showed me when he pulled the intake off. Don't have any pics but the hole in question it's because the intake is molded in plastic. The hole is tiny so there is a bit of mold flash in the hole. He showed me. He just chased it out with a drill bit to clean it up. He told me if you don't it will smoke.
-
God bless you. I am stressed. And it's not from the kit being wrong. It's from lack of guidance. But maybe you have just kicked on some LED lights for me.
-
here's mine it looks like my oil return line has a different route goes toward the muffler then forward. Was installed by Alpha.
I swear it looks like the line has a low spot in it... Im sure its just the way the picture was taken.. But it looks like the oil has to go uphill .