Ok I need some help here. I tried to reset the time on the clock and somehow set it to 24 HR instead of 12HR. For the life of me I can't find the setup back to 12HR in the owners or shop manuals. Some help please.
Resetting Clock
-
It is in the book also but you have to set/select to the odometer reading first
-
-
If I understand correctly, the SlingShot displays the 12 hour clock in "standard" display and 24 hour clock in the "metric" display, you cannot use the 12 hour clock when displaying metric units, or vice versa?
Bill
-
Display MoreIf I understand correctly, the SlingShot displays the 12 hour clock in "standard" display and 24 hour clock in the "metric" display, you cannot use the 12 hour clock when displaying metric units, or vice versa?
Bill
No, each of the 4 parameters can be set independently of each other. Distance, Fuel, Temp, Time.
-
Ok I need some help here. I tried to reset the time on the clock and somehow set it to 24 HR instead of 12HR. For the life of me I can't find the setup back to 12HR in the owners or shop manuals. Some help please.
To reset to 12 hr, hold the mode button and turn on the ignition. It should display the distance setting. To change a setting, press the mode button again. Once it displays the setting you want, press and hold the mode button until it advances to the next setting. When done, turn off the ignition. So to change the time, turn on the ignition while holding the mode button, press and hold the mode button 3 times to advance to the time setting, then press the mode button again to change to 12 hr. Then press and hold the mode button one more time to cycle through or wait for it to time out.
Welcome Catman ! Consider posting up on the new member thread with your location to find new friends and riding partners, and maybe a pic of your new ride.
-
No, each of the 4 parameters can be set independently of each other. Distance, Fuel, Temp, Time.
Well I'll be, when I went out and actually followed the instructions you are correct Slinglow, thank-you for the correction.
(Now to remove the battery, top it off and clean up them terminals!)
Bill
-
After you put the battery back in you will have to reset your clock. 
-
After you put the battery back in you will have to reset your clock. At least I now know how to do it!
Bill
