Polaris Slingshot Forum

(Quote from chavey2)

if push button start switch is not lighting up, I would start there and work back. If you can get access, it should be a 3 wire connector. Check for 12v between ground (bk/wh) and positive (pink) at the connector. Don’t jump…

Got my Harpy today and I must say I like it. Its very different from my other Spyderco's - no screws, holding it together and no pivot bolt, just stainless steel and very smooth opening and closing - and my Lynch clip for it shipped today, think this is…

Got my Harpy today and I must say I like it. Its very different from my other Spyderco's - no screws, holding it together and no pivot bolt, just stainless steel and very smooth opening and closing - and my Lynch clip for it shipped today, think this is…

Check Engine Code O 0520230 31

Since you checked the wiring already, my guess is an intermittent CB.

Yeah, I think the push button lighting up for a split second is a symptom of the main issue. Searching online, I found a lot of Ranger, ATV, and even Slingshot forums with people screaming for help with this with no actual correction provided. Seems…

(Quote from chavey2)

if push button start switch is not lighting up, I would start there and work back. If you can get access, it should be a 3 wire connector. Check for 12v between ground (bk/wh) and positive (pink) at the connector. Don’t jump…

That code does not show up in the 2015-2017 Service Manuel. But the 52023 are all associated with the ECM with under voltage or over voltage.

(Quote from SoCal)

No Sputtering, coughing, lurching, warning - It just shuts down. All the previous times I was driving (50+MPH) and the engine just dies. Have to put it in neutral and get off the road. This time, i just pulled out of the garage to…