Looking to follow the wire from the fuel sending unit to the gauge, anyone have a copy of the schematic ?
Wiring Schematic anyone?
-
-
Why?
-
The reason I asked is because when I bought mine it didn't even display a fuel gage much less how much fuel was in it. The DTE wasn't working correctly either.
-
the gauge isn't showing any bars at all, I pulled the sending unit and its reading ohms ok so its working.
-
As I said my gage wasn't showing at all and it ended up being one of the pins in the connector there at the tank. It wasn't locking in place and when you would put the connector together the pin would push back instead of plugging in.
-
I can email you some from service manual. Not sure how detailed it is I will go checkin a minute
-
As I said my gage wasn't showing at all and it ended up being one of the pins in the connector there at the tank. It wasn't locking in place and when you would put the connector together the pin would push back instead of plugging in.
You nailed it brother! it was the plug not making good connection. I now have gauge, I just have to put sender and pump back in tank, the sender assy is spring loaded and compresses when put in tank.
-
Let me know if you can blow this up....and if it shows what you need...