motor cutting out
-
-
-
We will figure it out and it should be an easy fix. A couple of odd ball machines have this low rpm rich issue. The conditions you are experiencing are not hurting your machine.
-
Me too 4 months ago.Bob said it was fine. Still does it. Hope there is a fix without spending a other $500. Think I'd rather put up a few extra bucks and go with a Haltech I can reprogram free.
-
Once you pay for the tune, he will re-flash it for $0. You just pay for shipping there and back.
The stock ECM works really good unless you want to run over 15psi of boost and track days. It's a very capable ECM.
Shoot me a note if you are having this issue and some AFR data and RPM range.
I'll test a solution and we'll work to get a fix for everyone. -
Once you pay for the tune, he will re-flash it for $0. You just pay for shipping there and back.
The stock ECM works really good unless you want to run over 15psi of boost and track days. It's a very capable ECM.
Shoot me a note if you are having this issue and some AFR data and RPM range.
I'll test a solution and we'll work to get a fix for everyone.
Well now I know. It was never mentioned when I purchased my turbo system. Thanks -
@TravAZ i assume your working on the tune with bob that's great finally gettin the right answer been talking talking to Henry about this all week. He told me bobs on vacation till next week sometime shitty thing is I was at lake George and Henry looked at everything and said it was good and also it wasn't acting up there maybe the slightly higher elevation. I mean I have no idea if their elevation is different from Boston I'm just assuming
-
-
@jluna317 I'm having the same issue around 3500 Rpm. I talked to trav last week and hopefully Bob gets it sorted out. Listen carefully and make sure you don't have any tin foil crinkling sounds at full boost. I had to switch my plugs because of the detonation issue I was having because of this latest tune.
-
Was this ever figured out? I have this exact problem... Not at lower rpm's tho... Mine happens around 5500 to 6000