So the person who bought my sling may want to go back to stock and sell the turbo ....when I installed my turbo, I had to buy the pig tail harness and splice into the wires to connect the 2 bar map sensor ....I lost the stock harness , so can anyone point me in the right direction as far what the part number is for the stock harness and also how to splice the stock one back in ? I know when I installed the 2 bar, I had to reverse a couple of wires I believe....thanks for any advice.
Goin back to 1 bar (stock map sensor)
-
Garrett Taguchi you mention something about the stock harness. Are you looking for a complete harness?
-
Garrett Taguchi you mention something about the stock harness. Are you looking for a complete harness?
I don't think I need the complete harness...just the plug that goes into the map sensor I believe ...it's been so long lol...I found the stock map sensor , but I cannot find the plug that I cut off. The hahn kit at the time required to use a different pigtail harness clip (maybe I'm wording it wrong)and reverse a couple of wires . So in order to go back to stock , what would I need to order ?
-
OK, this is the harness that flips the wires around to make a 2 bar map work. So just cut the side off that plugs in to the map sensor and wire it in color for color. Basically just don't let it do the swap of the two wires. Ill include the harness and the map sensor items on amazon.
-
OK, this is the harness that flips the wires around to make a 2 bar map work. So just cut the side off that plugs in to the map sensor and wire it in color for color. Basically just don't let it do the swap of the two wires. Ill include the harness and the map sensor items on amazon.
Awesome thank you. I still have the stock map sensor, so shouldn't I be able to just flip the wires around on my harness that's already on the sling?
-
yes.
