Well I just rode thru a flood getting back to the house from Murrell's Inlet. I had Micheal do some touch up on the pin stripping he did two years ago. I did find Auggie, MACAWS brother. When I left him half his tent was two inches deep in water at least
Posts by FunCycle
-
-
I just drove thru a flood getting back to the house from Murrell's Inlet
-
Yes, I can read between the lines and I also agree with you
-
-
Gerald, I was going to ask if they had dirt when you were born but you answered that question for me already.
Was hoping to bring down a few hockey sticks to show you a game of street hockey this year in Maggie, but not sure if I will have the neck brace off by then and certainly sure my neck won't take the twisties so soon after surgery so will have to take a rain check on that. Have fun at bike week and in Maggie
We will miss you. Don't do anything to mess up the surgery. I fell off a ladder and broke around 6 ribs about 6 weeks after I had my back surgery, I was very lucky
-
It was getting a little crowded on the Georgetown side around 2 PM
-
He is the one who did the 'Dragon' on Harvey's Slingshot Bu11sh1t
the 2015 Orange in the Calendar. Super artist.Yep! EjFord I know him. I will be in the middle of all of that every day until next Sunday. My first Myrtle Beach Bike Week was about 1950, give or take a couple of years. See I am older than dirt. I think I have only missed 5 years in all of that time (4 were U S Navy) and one other year that I never even rode over there.
-
What is he selling?
-
Say hello to my brother he will be set up there somewhere!
Find out where he will be and I will check in with him
-
Per Polaris, they are part SCR-HXBH-M4X0.7X30 10.9 ZPB so looks like m4 x 30? https://www.polarispartsmonste…s-49slingshotsound14sling
From the pic, looks like they are a security hex or torx screw (has that small raised bit in the center), so you need a hex that has a hole in it. Looks like this if you don't have one : https://www.ebay.com/itm/Titan…-Pack-of-13-/332718327933
Of course, they make the same for torx.
If you knew all of this, sorry, trying to educate in case people don't know.
Those bit sets are the best to have in your tool box, I have all three sets. Northern Tool has them if you have one close by. They also have a very, very stubby rachet ( 1/4 in.) that works perfect with these sets, it is maybe 3 inches long. I used it so much I went back to get another one and now they have the same thing with 1/4 on one side and 3/8 on the other, so I bought that one instead.
-
I had heard, thru the grapevine, that the City Fathers were upset about the behavior of some of the participants. Thus, they called it off.
Sent from my iPhone using Tapatalk Pro
And that is the problem! They cannot call it off. You cannot even close your store or restaurant to avoid it. Been there done that, they got sued and and lost. One restaurant had been closing for like 15 years at the same time to clean and replace equipment for the coming summer, they even lost.
-
I have taken the four (4) screws (bolts) that hold the Polaris Slingshot audio panel faceplate several times for different mods. The head of a couple of the screws are beginning to strip and it is getting harder to remove them. Have someone replaced these screws with something better or do I need to order these from Polaris?
Ace is the place with the biggest selection of any other place that I have found except Amazon. The last special screws that I ordered from Amazon had to come from China and took about 2 months, I could not find them anywhere else.
-
I think you can thank the 1%er wannabes for killing it. Act like savages and don’t get invited back.
Sent from my iPhone using Tapatalk Pro
Sir, you have the wrong information
-
now the government wants to "F" people who get electric cars
Illinois politicians want to add $1,000 fee to register electric cars
A few years back during one of the drouts a community wanted the residents to save water, the residents did such a good job they had to go up on the water bills so that they (the city) could pay their bills. This is a TRUE STORY
-
When visiting dangerdarrell you didn't let him have any cutting tools I hope.
He did not say whether he had a hood left or not!
-
I reluctantly bring this up, but wouldn't more folks be more inclined to purchase American goods if, for example parts for our SlingShots, local vendors priced them more appropriately where folks would be less inclined to go in search of (much) cheaper products?
Bill
An added note is where things may not always be what they seem on the surface, like who makes the most American made pickup?
https://www.tfltruck.com/2017/…ican-truck-cars-com-news/
Bill
The difference is cheap. They do not care that it may break in 90 days or what ever the mine set is just to go buy another cheap one. This is the mentality of the American buying public, They do not think that they may be putting an American out of a job, even their family members, just that it is cheaper. Which also brings up another sore point with me. Ethanol in the gas, you are paying dearly for that one. Our government says it is good for you. I RUN THE BULL SHIT FLAG UP ON THAT ONE.
-
First weekend of bike week May 11 thru May 19. Of course we cannot call it Myrtle Beach Bike Week anymore, they do not want it or the money that it brings in. Georgetown, S.C. side is already open, the Myrtle side will not be open until Monday I think
-
If this had been done years ago, there would not have been a problem now. I have said this every since the deal with Japan many many years. We should be charging at least what they (ANYONE) is charging us to import into their country. But all the buying public and the Politicians care about are how cheap you can buy something and the kick backs and destroy the jobs in the USA. They do not care about the future of the USA.
-
Have a good day
-
"O BOY" I do not know what to say