Had Dave@DDMWorks install there oil cooler and filter relocation kit today. Just a little extra protection since I had the DDM Stage 1 turbo Installed back in early February. 😀
Posts by SlingSC
-
-
Hat's off to Dzemboc77 for taking the time to post all of this and hats off to Dave@DDMWorks for taking such great care of him and all of us. I will be doing exactly the same thing with the exact same turbo in the fall. I can't wait. Dzemboc77 it has been a pleasure to follow this thread. Keep us updated.
123hotdog
I had the DDM stage 1 turbo installed in early February this year and have been loving it ever since. It is a blast to drive with a lot more power and the sound of the turbo is sweet. Dave@DDMWorks installed mine and the fit and finish of the turbo kit is just amazing. I am returning to DDM this Monday to have Dave install the oil cooler. If you are looking for a turbo, you can’t go wrong with this setup and the service and support from Dave@DDMWorks is outstanding! Nice write up on your install Dzemboc77. 😎 -
I have recently added a DDM turbo to my Slingshot. After reading this post, I was thinking it would be nice if I could add one gage like the AEM 5” so I could monitor things like boost,air,oil temp, coolant temp and so on. Can the stock ECM with the updated turbo tune be used with the AEM or does the ECM need to be replaced with a aftermarket ECM? rabtech Dave@DDMWorks
-
Happy Birthday FunCycle , hope you have a wonderful day. Hopefully when this coronavirus is over we can met up and ride.
-
Finally had time to install the 2020 gap fillers I got from UAS. The guys at UAS were very responsive to my calls today and told me everything I need to know about the install. They look great and I really like the switchback feature on the lights.
Really like the looks of those 2020 gap fillers. They look really good on your Slingshot. How was the fit and finish of the gap fillers? Once installed, do they fit secure? Was it difficult hooking up the switchback lights?
-
Does the batch of pinion braces you are making now have any modifications done to them that will clear the welter 2.5” exhaust without having to modify the exhaust?
-
Happy Birthday Slingshotinfo.com
Great form with the best members. Hope all is safe. Can’t wait to see all of you at Slingshot in the Smokies in August. During the coronavirus crisis, this is where I come to get this mess off my mind. -
Just called the Motel in Maggie Valley to move my reservations to August. The lady said, that there wasn’t much going on up there. She said it was like a Ghost Town in the Sky.
-
took the 2020 out today for a little Home Depot run.
That 2020 SS looks a lot cleaner that it did a couple days ago. 🤪 I like that blue color.
-
OK. I'm back on the road leaving melted tires now...
rabtech I really like those Dave@DDMWorks fender Vents you have installed. How hard is it to cut the hole out for the vents or better yet how long does it take to get the courage up to cut them? 😳
-
I’m running into this issue right now. I have the welter 2.5in and I can’t get the pinion brace to fit. I don’t think I can move the exhaust far enough to make it fit either. I’d love some thoughts on mods to do to make this work. I emailed Kyle D as well to get this thoughts. Here are some photos
I talked with Kyle and he has run into this issue with the 2.5” exhaust. He said that he used a rubber mallet and bent in the exhaust where the pinion brace is hitting the exhaust for clearance. It would be nice if Kyle D could modify the pinion brace where it is hitting the exhaust. Maybe adding a chamfer too the pinion brace would eliminate the issue. Hope this helps. Good luck
-
Been cleaning the Slingshot today. It’s been a while since it had a good cleaning. Man that Southern pollen gets everywhere.
-
Well got my exhaust back on and I'm very temped to go for a ride now but really don't need anything from the store 😡..........
........while underneath the slingshot I'm glad I remembered about this Zerk fitting , hit it off with some grease , though everytime I do, I don't think anything is going in there lol
What type and size exhaust are you running? I was wondering if you had to do any modifications to your exhaust being you have just installed the ZZP pinion brace. I have heard that a slight modification is needed if you are running the Welter 2.5” dual exhaust.
-
All done! Not a lot of difference, really, but much better. I learned a couple of things in the process... 1) the brackets and bolts that hold the splitter on only allow you to slide the splitter forward and back. If you loosen the top bolts, you have a small amount of up and down movement, but not much. 2) I imagine, with the flexibility of all that plastic, the fit & finish of everyone's Slingshots is probably a little different, but at the end of the day, job well done!
Roadhawg nice work. Now all it needs is one of Dave@DDMWorks front V2 splitter. 😎
-
Roadhawg , Polaris did away with the fog light harness starting on the 2018 models. Sling mods may have a kit for hooking up fog lights on the 2018 - 2019 models.
-
Country Boy can survive (Hank Williams Jr)
-
Happy Birthday Angie@DDMWorks !
-
If anyone is still having an issue trying to participate please let me know
We are trying to correct the issue
MACAWS , I believe the issue you are having with people not being able to sign up for your event is due to the number of participants you have it set for. Once it reaches the participants total it won’t let anyone else sign up for the event. If I remember correctly, you were having this same issue last year with the Mayhem in the mountain event. Most folks that sign up for the event have two people attending. So if you want to hold the event to 20 Slingshots the participants number needs to be set to 40. Hope this helps you get the issue resolved.
-
Nothing planned on these right now, having a hard time keeping up with the initial orders actually on these, our 3D printer is going to be working overtime for the next couple weeks it looks like.
The reason you are having a hard time keeping up with orders and working your 3D printer overtime, is probably due to using that shiny red Slingshot as a model for that splitter on your website!!
-
Will the baker wings work with the slingshade?
I am pretty sure they make them for the Slingshade. I believe I saw them on All things slingshot web site.