Got mine installed, but will be calling Dave@DDMWorks to order the bracket set up. now to do some wiring clean up.
Posts by Trooper
-
-
Here are the install instructions I reciever.Rotrex install Rev D (1).pdf
Thank you sir
-
Talk about great support!
I agree
-
Thanks that is really interesting. Could be hard to get at the dipstick once the hood is on but maybe not. I think I like it on the radiator frame ie up higher. Let me know how easy/hard it is to get at once you gave the hood on.
I am in the process of trying to move mine up to the radiator support bracket now., It may be a little trouble changing and adding oil but do like how it is all tucked under the hood my personnel preference anyway. Going to try to google some pictures and get a good look at how it is mounted up.
-
EricRedSL here are some pics, let me know if these are not good enough and i will try to get some better ones.
-
Trooper Give Dave a ring. Spent yesterday and today with him watching / helping where I could while he installed two of these kits. He always stopped for calls and must of helped out a half dozen folks while working on our kits. Also, for what it's worth we had the exact same oil cooler you have and he mounted them flush with bottom of the intercooler, not quite as low as Wraith's is. My sway bar has the DDM brackets, Bobby's did not - but pretty sure he did both exactly the same. Can try to snap some pics tomorrow if it'll help.
thanks, I ended up putting some big washers behind the bracket, that seemed to help out a lot. I think my sling is off some, I spoke with a good forum member yesterday and we were talking about each sling has some differences to them, depending on the tech that put it together that day or week lol. I was going to call dave but knew he is always busy and really don't see how he gets anything done lol. but your right his customer service is awesome for sure.
-
happy happy birthday
-
have a company near me that will install a two post for 3500.00 don't think that is a bad price. will lift up to a 1 ton dually.
-
where I have one on the radiator bar is a pita to get the oil stick in.
I may end up trying to relocate mine up around the radiator, don't like it down that low ,plus just one blot holding it on. the the newer slings just have one bolt for the fender where as the older ones has two.
-
Hello all! We are still here and manufacturing fenders and delete kits! Since the pandemic we have had to relocate production but we will be taking preorders soon for new sets. Please reach out to us on Facebook in our group Three's Da Life or at info@rockmybling.com and thanks for the continued support!
happy to hear this, I never was able to get the first set of fenders, but now I am happy you all are still doing these. I do not have Facebook are anything but would like to try to get in on an order.
-
where I have one on the radiator bar is a pita to get the oil stick in.
not sure if you can tell by this picture or not it's all down by the sway bar, where the lower fender bolts up.
-
where I have one on the radiator bar is a pita to get the oil stick in.
yes sir i will i am at work right now when i get home later i will send you some .
-
Display MoreSad day for me today
Took my Slingshot and all its stuff to its new home in Durham NC, Truck is sold and the trailer is going to a good friend and forum buddy. I can't believe that the Big Red Truck, Big Red Trailer and the Lone wolf will never be in the same place at the same time ever again.
But I will be hanging around just to annoy you all. - See you guys in Maggie I should be there Thursday
I have never had the pleasure of meeting you in person yet, but hope one day I will. you have been a big inspiration and help on this forum. as you helped me with my wing install and all the information you provided sir.
-
I'm glad my install had no issues. Went very easy for me.
so far this was the only snag I had. the directions have been good so far, I do wish there were a few more pictures but all in all no complaints as to the directions on installing it. I feel like after I get the cooler situation lined out the rest will be easy peazy after that. I did a google search on the supercharger for pictures and I noticed one thing in a few pictures. my oil filter and container are mounted down on the passenger side behind the bumper area. and in a few pictures I seen they had there's mounted up near the passenger side radiator area which I liked, and it looked good as well.
-
went to the parts house before work this morning, got some longer bolts and will see if adding the washers fix the problem, I believe it will and thanks again for yawls input.
-
From your pic the bushings look fine. The spacing from the radiator to sway bar looks good. But, your oil cooler and intercooler need to move further away from the engine. I would loosen all the brackets and see if it. can move forward. You should have about 1/8" of space between the oil cooler and the sway bar.
I wonder if i take the support bar back off and add a washer behind the bar if that would give me enough clearance
-
WraithSS and EricRedSL and Oomp thank you so much for the in put and help. got on Dave@DDMWorks web site there bushings are out of stock for now.
-
seems like that is the logical answer the bushings are to big. if the bushings were smaller then i feel like it would fit like it was suppose now.
-
bushings pic
-
factory bushing i will get a pic i have tried to push forward just do not want to damage anything. I followed the instructions lol but I feel like something is not right somewhere and it could my sling and not the kit it self.
