Don't forget to communicate with me so I can keep your smiles smiling. I just received a donation for $30 from a Trent. I thank you if it was just a donation but remember to help me keep track and above board by talking with me so I can look like I almost know what I am doing 
Posts by gpcustoms
-
-
OKay Two requests for black handles and thats all I have for black. Me thinks that the black handles be more jedi approved then the brushed aluminum ones think I
-
No hate Brother!! What you are doing is all for a good cause. Let's go with black stitching!!
Got it, sent you an e-mail and information so feel free to stay in touch and tell me what I can do for you(oh God Tripod will have a field day with that).
-
Thats a cool idea. I am honored to share some tarmac with you young Jedi. Will be coming in from Houston on the way out west.
-
@gpcustoms could I get one of these with the black NRG handle and Silver/Gray stitching on the boot?
Your gonna hate me but I am a one legged man in a vendor ass kicking contest with only red or black stitching available. I wish I could offer more options but alas I am all alone
-
happy thoughts...
You said it!! When you can take a look see at some of the maps I have shared on my Lap of America Thread,..
-
I'm just a test dummy for fab factory. I don't think they're going to continue sponsorship at the old place, or get started here, but that could change. All ff's existing and future products can be found at slingmods or cycle springs websites.
And @gpcustomsis the man!
I wanna be Shack when I grow young
-
After a stop over in Malibu its back North through Yosemite and the Tahoe Forests on the hunt for some Wyoming big sky country.
The fun part is hidden away between Forest Road and Meadowlark for switchback heaven in route to Devils Tower
A short jump from the tower to Mount Rushmore and back down south to Colorado's Pikes Peak and the passes around San Isabel heading into the heart of Laplata County and my childhood home of Durango for some much needed family time and the promised trip to Mesa Verde National park just west of town and the loop
Make sure and wave if you see a dirty silver SS going the other way with grass hoppers all over her!! -
Just in case there are any interest in a long twisty 90 mile run. This leg I am especially pleased with every time I take the Coronado trail.
Just make sure you have fuel on these switch backs!
-
We will have to wait till @MACAWS gives his approval, since he was the first owner to come up with the decal idea and it's his design until he gives me the go ahead, but as soon as he does, I'll be glad to make you one!
Its all on you now Macaws,...Nothing like a bit of pressure from the peanut gallery
-
No vendor here young man just raising some funds for St. Jude.
Can make you a nice E-brake kit if you are willing to share with the kids however
-
On yet another note I have enough bits to assemble 2 brushed aluminum and 2 black handled E-Brakes.
-
Always thinking ahead. I like the way you think. That is a really great idea. Got me thinking now. DANGEROUS!
I know,...Scary! Hey Mark I think I want one of these decals as well before the cat has escaped down the road now that its out of the bag
-
Unfortunately in tx not fl
Well if there is some coffee and a bite to eat I will be driving through the Houston area in mid August right along 10 on the way to Carlsbad NM
and the Coranado Trail.
Making the lines was the hardest part and we have a member here that is a Hydraulic expert so its very possible you could have everything ready to rock and roll for an install party -
Ya know it just dawned on my that Stickerdick made a perfect template for a center console pad with that cool carbon graphic.
Lay it over some base plastic and cut out the shape, Glue on some foam and all you need is some vinyl or leather with a bit of piping. Any local upholstery shop could do one since you have a template and be as creative as you like.
Hell I will buy one of those stickers as soon as they are available Mark! -
Oooh
GP, how much can I donate to st. jude to get a turn key setup from youIf your local or localish I will be glad to help you wrench one in place but its really a straight forward idea and simple install.
Think happy thoughts -
The seal for AN and or JIC fittings are called Flare Savers, most hydraulic shops will carry on the shelf. Cheap insurance for a great seal.
Thanks Greg, What a great idea and peace of mind!
-
Earl cooler with 10AN connectors about 6inches high and 14 inches wide. Ordered it for my Corvette but could not use this one so although its new its been sitting in the box for about 4 years
Also used some Earl braided 10AN hose with some O-ring fittings I picked up from Summit Racing.
Used two 45 degree fittings on the Adapter and both remote filter and cooler got 90 degree 10AN swivels
The remote filler was an MMR with O-ring fittings, Uses the large HP4 and 12 filter but only a K&N HP2002 will fit if using the same location. I like it because its a high flow unit and can be safety wired.
Adapter was a CBM adapter with O-ring 10AN fittings.
Now I have done these many times and have always chased down little leaks for the first week but learned a trick that perhaps only I didn't know and thats to use some neat tapered seals that drop in over the male fitting and ensure a leak free installation(Thanks Greg!!).Talk about learning the hard way
-
Oh boy I installed my new seats with planted brackets and the new seating position is higher and turned my windshield into an ornament until I cut and weld up the brackets. Talk about the wind in my hair
-
Yes I installed one with remote oil filter using 10AN braided lines.
Engine temp is way low and hugs the 180 thermostat in most conditions now. I have never seen it run this cool consistently.
I hung mine maybe 8 inches in front of the rad on an angle using the bar below the headlights and the chin spoiler bar up front near the grill. 4 bar mount brackets and its solid and not blocking the radiator. I installed a lower scoop with SS grill to scoop air onto both the cooler and radiator for supplemental cooling.
