Why do you want to tow it instead of driving it?
The Roadtrek 210 Versatile in the background is our home away from home. It is a fully optioned motorhome. Cheaper and safer than staying in a hotel. It carries our meals, tools, clothing and more.
Why do you want to tow it instead of driving it?
The Roadtrek 210 Versatile in the background is our home away from home. It is a fully optioned motorhome. Cheaper and safer than staying in a hotel. It carries our meals, tools, clothing and more.
This is my entry: Slingshot, trailer and tow vehicle
Unique video
We will try to make it Sunday
WELCOME
East Tennessee (near Knoxville)
Slingshot, Trailer and Roadtrek motorhome ready and leaving tomorrow (Wednesday) morning.
Welcome
Thanks, Dave.
I was able to turn it tighter (about 2 turns) with an allen wrench.
I hope this will take care of the problem. I will stop by and see if I can spend a few $$$ in your tent/store tomorrow.
Loaded the Slingshot on our new Predator trailer and getting ready to leave for Maggie Valley Thursday AM. Pulling the trailer and Slingshot with our Class B Roadtrek 210 (Chev V8) about 125 miles (2 hrs.)
We ran into a couple up here at Maggie Valley that we’re leaking from the fitting for the coolant re-route. Both times the fitting was just a little loose, a couple of turns with a 3/16” Allen key and all was good. Hope that helps.
Mine is also leaking a tiny bit. I will take a closer look tomorrow and see if needs tightening before we go to Maggie Valley
Installed a Red DDM Tank.
Nice Ride....
I like what you did there MACAWS , thank you , Have a cool new tee bar , windshield frame coming out for Maggie too, but as usual it,ll be available last minute as it sits on my drawing board for 6 months then I leave myself six days to build it
Can't wait to see your new T-Bar & Windshield Frame at MV.
Thanks. I will stop by our local Ace Hardware tomorrow. If I don't find a good replacement, I will have to order them from Polaris.
Getting ready for Maggie Valley
I have taken the four (4) screws (bolts) that hold the Polaris Slingshot audio panel faceplate several times for different mods. The head of a couple of the screws are beginning to strip and it is getting harder to remove them. Have someone replaced these screws with something better or do I need to order these from Polaris?
WELCOME !!!
Looks like is time to take a second mortgage on my home...
Sounds like a cool idea.
I contacted Matel in September 2018. No Luck yet !!!!