Posts by lokati

epoxy and a steel plate there would work as well

what need instructions for?

remove stock shocks
replace new shocks with same bolts
ride

compression and rebound adjustments are solely based on the ride style that you prefer. Its 0 with my wife in the sling and 10-12 with me in it alone.

Awesome! Thanks!

Any news @andiparker ?

bracketing to move master cylinder?

Edit: although that would require lot more than a simple bracket i guess..

I bet you could sell 50+ easy at the event. This is a beautiful and well thought out part.

Oof I must like it rough. Mine are set to 10 and 12s

I've had the alpha intake and now the hahn turbo charger.

I would go with the hahn intake if I did it over again

Shouldn't the whole site be viewable by members only? I don't see any benefit to having it otherwise..

I don't have stock lugnuts so I'm good I'm sure I will invent my own unique problems!

the stock lug nuts were free, so they are obviously the best choice!

Probably.. but I wouldn't buy lug nuts that cheap on principle. Its the only thing keeping your wheel on the sling

I second this. I thought my brakes were fine, bought a master brace because people kept saying to. It sat in a box for almost 3 months and I decided to finally throw it on and the difference was night and day. My brakes are *ROCK SOLID*, I upgraded pads at the same time for the front and I haven't felt better braking in any vehicle.

Quote from rabtech

INewton was just asking if I knew of a longer stud. He may be adding a spacer or something to his.

We just need new lugnuts.

Yeah I have a spacer on the rear wheel for the 345 to clear the QA1s which are on eibach springs that are significantly larger in diameter than the stock springs. Still got a good 10+ full turns on rear lugs installing them but I'd rather have longer studs just to make sure.

How long are stock studs? I'd like to run longer studs with the turbo kit. Especially out back.

yup aluminum according to website

Quote from MACAWS

Are they aluminum or steel?

good question. I would say aluminum but I'm not positive

full blown motorsports has a gorgeous set that I use.

Pft... hahn is not that money grubbing!