I would of been pissed, I don't see rice anywhere on that menu!
Posts by VIPNiSS
-
-
I know don't taunt me dammit! I have the spring to do so! Lol. I guess this is good cause I am getting accustomed to the power slowly
-
Freaking love it. I been driving it to random places and volunteering to go places. I'm not going to lie, I have gone in the garage and stared at it. HAH!
I'm still very easy on it cause I don't have any gauges yet
-
In for results!
-
Was a pleasure meeting you as well. Hope to catch up with everyone soon
-
I will try my best to make it. We have a lot going on in the next couple of weeks.
I am running no gauges right now. I will have to come back and schedule a time for Dave to install it. Dave had me throw in a yellow spring in the wastegate to be safe right now since I don't have any gauges. We are estimating with the spring I am only boosting about 3psi give or take.
As far as the BOV I am guessing i might have too stiff of a spring in there for low boost? This is all new to me and still trying to learn.
-
I wanted to say thank you to @Dave@DDMWorks and his group of guys! Dave recently posted a alpha turbo kit for sale that someone took off and installed his DDM supercharger kit. I took the bait and bought the kit.
Now this is where I wanted to give major props to Dave... he simply could told me to come pickup the kit or pay to have it shipped and be done with it. However this wasn't the case. Not only did he allow me to use his shop but they also lended a hand when I had questions or needed help even though it's NOT his product. Unfortunately I tried to bring all my tools but I did forget somethings which they let me use. Now this is what I call a truly good person/shop.
I arrived on a Saturday and couldn't finish everything. Dave and his staff stayed until about 9pm with me. Then Dave even came back on Sunday and stayed with me until about 9pm again for me to finish what I needed and made sure I was okay to get on the road.
Truly a great person and great shop. I definitely recommend Dave and his shop if anyone is needing any work done on their Sling. I will eventually be back for the supercharger one day! Thanks again Dave!!!
-
I just installed ARP headstuds today as well and I found several that were loose compared to the others. great quality control... not!
-
Don't forget after you do the 22 lb-ft, you need to turn the bolt another 155°. Missing that step will cause all sorts of issues! Stock junk GM bolts only. I do the ARP studs to 75 lb-ft (in steps) even though ARP recommends more.
Did I read that correctly? I am thinking about replacing mine with ARP studs as well. Instead of the 22ft lb and another 155 degree turn you torqued yours to 75ft lbs instead???
-
-
I ran across this on facebook. looks like Underground is trying to build a 4 seater slingshot.. cant wait to see the end result.. i wonder if polaris is going to copy and start doing this.
-
glad your okay Bill
-
At 20K miles. dealer replaced my rear rotor saying the noise was from a warped rear rotor. Noise started back up a short time later. During my 25K mile service, the mechanic thinks new one is warped, too. Asked me if I had driven thru a puddle with a hot brake rotor, and I responded I don't ride if it's raining unless it starts raining when I'm already out and don't usually ride if rain is likely.
At least they replaced the faulty brake sensors and I was able to drive the 100+ miles home without losing the Cruise Control. My angle drive is still leaking, but they claim they need a lift to work on it and are trying to convince the dealer to buy one.My dealer didn't require a lift to change out my rear pinion seal. They used a jack and jack stand in the rear. It took them close to 4 hours or so since mine was only the second one they have done. They said polaris warranty only pays them close to 2 hours of work time.
-
Mine moves around a LOT when she's tied down - oh wait, this isn't the NSFW section. Sorry
LMAO. You win the internet today. -
sorry for your loss.. prayers for your family.
-
congrats dude.. wish you a safe fun time!
excuse me while i.....
-
He doesn't call himself @Tripod for no reason. I see where he can rest his tripod in this picture.
-
Figured it out with the help of the seller. Thx guys. Btw it sounds great but yes the fumes suck like everyone else said lol
-
hey guys I just bought this exhaust from another member on here. I cant find any literature on installation of the exhaust. I see pics on the internet on how the exhaust is routed but I can't seem to route it in connect to the header. Do I need to remove the front end too? i removed the entire side panel and my wheel.
-