Posts by rydahog

  • TRIP COMING UP..

    ok, SS is ready for my Fla..to NY trip this coming monday...hopefully little to no rain along the way...but everthing is ready to go..SS is humming nicely. All fluids and filters done...cant wait...:) picts along the backroads coming and going as i make my way up..:) ttyl...:)

  • TOWING..

    not sure how to search for this,,but i have a 2015ss, did it come with polaris basic 2yr towing>? any info,,thanks planning a trip from fla-ny, or am i better off just using my INS. co, towing? thanks

  • POSSIBLE LEAK..

    i thought i had a slight leak on the pinion gear area.it appeared to be wet,,,took it to the good folks at @cyclesprings and got in up in the air,,and NADA..NOTHING..so that was good news to see and hear...it may have been from greasing the shaft..(no pun) haha! but i am glad its not an issue as i plan on a trip from Fla to L.I. ny in about a week or so...as it stands now..sling is running great...:)

  • ERROR CODE...

    ok,do you think this would happen if the battery was totally disconnected.? his was running fine,,then he had batt off totally, ? now he got this code...? thanks

  • Trade 1320 exhaust for stock system

    hey Al...hows it going? we need a ride some day...yeah,,i hope he wants to make trade,,the stuff i have is what he needs and i was looking for the 1320 so best of both worlds for us both....ttyl buddy...have a good day...

  • BRAKE CALIPER ISSUE

    so today Kevin Kuiper and me got together to change my oem brake pads..i wanted a bit better pad then oem, so after some research i settled on the oreilly's brake select ceramic, finally get up to see keven and we get SS on lift..we do the fronts fine,,no issues...then the back one..we get top bolt off,,and then the bottom one is giving us trouble. we clean everthing up, install new pads, but then the rear bottom bolt will NOT go in...we look and try for a bit,,and it wind up that POLARIS INSTALLER in factory, stripped the BOLT into the shaft part that goes into the caliper with rubber boot. We go to the store as going to polaris dealer, they do NOT have replacement part for calipers. We finally go to NAPA and NOPE...No good...then as last resort we stop in Advance Auto,,and low and behold they have a kit for a 2009 pontiac solstice that the SHAFT part with rubber boot fits perfect...the problem then is that the bolt with this kit is to short,,so off we go to ACE hrdwre. and YES! they have correct size bolt,,and we got a small washer to fit..and WAA! LAA!...re-installed ,working like a charm. so if you have any issues..with similar situation. follow above suggestions..once again thanks Kevin Kuiper.In pict,,you can get this replacement long caliper bolt that is for a 2009 pontiac solstice, the small bolt does not fit, but you can go to ace and get the silver bolt to fit with a washer,and it will help you get the caliper back together. NAPA and Polaris dealer did not have the caliper kit bolts in stock..so this was final answer..and it works...:)

  • DREMEL

    So i am installing the brakebest pads on the front, but they have the metal tabs on them,,do you think i can cut it off with a dremel tool? or get a grinder from harbor freight? thanks for anyone who has done this.:)