I was finally able to get the rear interior panel behind the seats loose enough. After removing about 60 bolts. Now I can run cable from rear factory hole down behind the panels then along the console. Hide nicely.
Posts by hwy64auto
-
-
I got a aftermarket camera that is the same size is factory camera. Was wondering how factory wiring is run or best way to get to radio.
-
I hooked up the trigger wire on radio to switch and the other end to a powered switch. Put av jack in. All I get when I flip switch is black screen saying pic may be reversed. Where do I send power to camera?
-
what wire did you use for the switch?
-
Rab which wires did you use? This is the harness I am working with
-
calling Rab. I have a 2015. Trying to hook up camera to pioneer unit. This is what I am working with. Larry said you only had to use a few wires on his. The big
T plugs in kit made to go in factory harness I can't use them because the factory plugs already used for radio harness. -
Scosche wiring harness for camera with aftermarket pioneer head unit.
-
what is the best way to access the switch connector on transmission?
-
Welcome to the SS club.
My ‘15 just crossed 8000.
The thing I wanted to do first and foremost was add more lights, front and back. You can never be too visible. I’ve added about $1000 worth since buying mine. Most of my other mods have been safety related. Now I have just completed some performance mods also.
It’s an open pallet as far as customizing goes. Nothing is cheap either. I’m well over $5000 for sure. Probably closing in on 10 shortly...
You forgot the pix...
what kind of lights have you added??
-
trying to upload pics
-
trying to upload pics
-
Just bought this 2015 SS w/ 7500 miles on it . Here's some pics would love for everyone to give me input on what else to do as far as performance and lighting.
-
Just bought this 2015 SS w/ 7500 miles on it . Here's some pics would love for everyone to give me input on what else to do as far as performance and lighting.
-
Previous owner put in a after market radio. It had a/v Jack's. How can I get the camera to work?
-
always room for more tshirts lol.
-
All I am finding is the switchback strips no pods. I think I would rather have a actual housing instead of the strips.
-
looking to put some led running lights on the front, but also want them to be turn signals. What is a good brand to go with?
-
depending on the year of your slingshot it may or may not have a zerk to lube the u-joint. As someone above said the best way to get to it is by removing the two drink cup holders. if you do have the zerk it should be lubed every 5000 miles when you change the oil. To lube it you will need a needle fitting on the grease gun to get into it, there is not enough room to get the normal grease gun fitting in there. Here is a picture I took through the drink cup holder holes last time I lubed it the zerk is just below the bolt with the dot of green grease on it.
what kind of needle? And where do you put it in the center of zerk where the ball is?
-
I was wondering where all the zerk fittings are on the ss.