Posts by rabtech

Gosh yes. I have all kinds of stuff mounted to my windshield post. I have two RAM balls and a rear view mirror and a Xgrip RAM phone holder and I have a 3 way RAM ball that lets me mount my radar on the third ball mount.

One thing you would never want to buy when shopping would be a gallon of ice cream. Well you might if you wanted ice cream soup.

Quote from MACAWS

Hey Bob
Do you think you can tweak my turbo tune and smooth out a rough idle?
Seems to idle rough when hot cold it starts and pers like a kitten.

Thanks

Sounds like you need that Kenny tune.

Your doing the right thing by waiting on the correct size. You don't want thin threads. :cool:

Put me down also. I couldn't resist. :p :cool:

Welcome Bob! I'm glad your here.

It's probably the safest way a TV has been shipped in a while. It won't even shake at all in the seat.

If I turn it the other way the screen hits my plastic. The back is tapered just a bit and it just passes my painted console. I just wrapped it in my favorite Precision Turbo thick hoodie. I don't think I will have to worry about the rock issue. My windshield is taller than the TV is. What do y'all think about this picture. Pretty cozy isn't it????

We all get creative when it comes to wanting to use the Slingshot for every trip we can. Today I had to think outside the box. literally "out of the box". I bought my mom a new TV and wall mount for her bedroom. And I didn't want to take my truck. So I tossed the box and this was my solution.

I still have to wrap the TV with a quilt. I think it will ride the 100 miles to my moms house just fine.

Quote from kenny_h

Ok guys..as far as the long sleeve shirts go, I am working on getting some really nice ones made. I thought it would be cool to have some shirts that you could ride in all day and not get sunburned, and still not die of a heat stroke! I am only going to do one run of these and they will be a limited number of them being made.(roughly 35-40 shirts) They will be priced higher than the T- shirts, so they might not be for everyone. Probably around $38-$40. A plain Columbia long sleeve shirt costs around $50 (plus tax) and they do not have cool Slingshot stuff on them! The shirts are 100% made in the US. Not made overseas and brought here to be printed on. 100% moistuer wicking mesh polyester with UPF 40 sun protection and Dye Sublamation printing. As soon as I get the final proof back , I will post pictures of them and then I will do a "Pre Order" where the first 35-40 lucky few can P.M. me how many and what size they want and then I will have them made. They are costing me too much money to go in blind and have x amount of smalls, x amount of meds, x amount of larges etc...with out knowing what exaclty you guys want.

I wanted to make sure that people knew the shirts that Kenny is talking about are the result of Kenny wanting to do something nice for me. He (with his money) wanted to have a few of these high end shirts made (around 10) and GIVE them to me and his close friends and family. What he found out later was that the minimum was 48 shirts. So that is why he will have about 35 of these shirts to sell.

I wanted to let people know that these have nothing to do with the nice black t-shirts that the site will have at the Smokies and will be selling online. The pricing on sites the t-shirt will be 20.00 to 25.00 according to size.

When Kenny gets his proof made and I approve the layout I want him to be able to sell the extras he made here on the site. After these are gone the site will control, order, and sell all the products that have the sites logo on it.

I just wanted be as transparent as possible about why Kenny had a shirt being made and sold. I didn't want people to have there feelings hurt either because I wasn't ordering from them. And I didn't want to give the impression that using the sites logos was OK to do.

If mine ran any better I would have to pour water into my gas to slow it down so other people could keep up. :cool: :cool:

To cool for me and my small amount of aluminum

Yep. You can drive it. I would make sure they had you scheduled to have the bearing changed out. But in the meantime I would be drive it. Mine has been popping a while. I was going to get Noel to change it in the mountains.You can hear mine kinda popping when it's in the air and when it's on the ground.

Quote from funinthesun

Close, but I'm sworn to secrecy on this one. Suffice it to say that the RED ones will prove to be fastest in Maggie Valley once again.

Not sure how your going to get to Maggie Valley. Must be trailering yours. Because I know blind people are not supposed to drive.

Quote from funinthesun

If we had our names on the shirts, some of us would have to spend the days ducking and avoiding people

Hello my name is @Shack and I have an aluminum fetish.

Quote from Guardian_Angel

Tossing around the idea of getting another one to call my own... a HIS and HERS... we will see... glad to see your inventory listings..

That is a pretty neat idea. I may purchase another one when I get mine paid off. I think I did 36 months on the finanance. So I have about 18 more months till she is mine. Maybe they will have version 2 out by then. It would be neat to have one turbo charged and one supercharged. Or maybe just a really strong built engine.

I bought mine thru DDM Tuning. (Not DDM that does the engine work). I have replaced 3 of my HID ballast. They will start to flicker over time. And then they will die. I have no issues with low voltage. And I have no issues with current draw. I finally ordered Morimoto Ballast and have no more issues.

I pulled over on the interstate to reply because I wanted to let you know that some ballast just suck. And unfortunately I can't tell you that yours suck but I can tell you that I had plenty of HID issues. I can message you tonight and give you a place to get the Morimoto ballast that will plug into your existing plugs and require no modifications or change in bulbs.

Quote from STYLN

Hey Rab, if you can respond to my PM when you have time I may be able to help you with the small amount of long sleeves needed!

I'll PM you tomorrow.

Yep. Some things I'm fast at. Just ask my wife.

Some things it takes me a bit longer to accomplish. After we get back from the mountains I should be able to sit down and get some custom items ordered.

When I can get my feet under me and start to walk I'm positive i will have polo shirts with a really nice small logo and all kinds of really nice things. I just want to get some nice thick t-shirts out to everyone.

It's that crawl then walk then run thing I am having to do..... :p :p

Quote from Shack

What about some long sleeve dry fit shirts?

Got to to get the shirts that the majority of people want. Kenny is working on some of those dry fit shirts. There will only be a few of them when he does order them. They are kinda expensive and I can't afford to buy them right now. I told him if he had to have them that it was OK to get a few to try out.