- I'll be there this weekend 9/9/18
Posts by frehleycomet
-
-
What are you trying to ask @airoutlaw
-
I wish this was closer to me. 6 hour drive for me GRRRRRRRRR!!!!!!!!!!!!!!!!!!!!!!!!!
-
Ok here is what I did. I purchased a Knight Rider LED strip and plugged it onto my car to see if it works, didn't permanently install them yet ok. Everything worked perfect. Lights went on and off when I clicked the button. All the modes worked as expected. Everything was excellent. So night time came around and I had the lights inside my home and instead of going out and hooking them up to my car just so I can double check everything again I found a power supply that input 110v and output 12v as a car battery puts out. So I plugged the power supply into the wall outlet and the LED lights went on BUT the modes were not accurate the buttons on the remote weren't in sync and obviously nothing worked the same. I then took the Led strip out to my car and hooked them up and everything was fine again. My question is,,,,,Is the 12v from a car battery not the same as an output 12v from a wall outlet. I'm no electrician by all means but as far as I'm concerned 2+2=4 in my world so tell me if I'm wrong please.
-
Can anyone recommend a good action cam that I can hook on to my SS for less than $150
-
Do you paint the midnight blue like my profile picture SS. I review this pay later, gotta get back to making lira
-
Bahahaha funny guy. So now here is a ticket for being a wise guy
-
How much @SlingLow
-
Wow never thought of that. I didn't even realize that the gas tank is right there too. Thank you so much for the info. As I have heard from others that they have had zero issues with the 3M and the plugs plus now the ever so important information that you have shared with me it should be a no brainier to go with the 3M take and the plugs. Thank you again @SlingLow
-
I got pulled over with a warning because I installed some LED strips on my shark fin right above and in between the two seats facing forward. No one told me they couldn't be blue lights. They thought I was a Slingshot Cop hahahaha. True story I have the warning to prove it lol .....Hence that is why I have a Thread as to how to remove LEDS
-
Can I use self taping screws on each corner plus the 3M tape instead of the push pins. Not sure if I trust the pins compared to a screw which will grip onto the back cover
-
Damn a 6 hour drive just for a 3 hour event
-
Thank you all
-
@KayTwo I have joined other groups in Ga but they are all 4 to 5 hours from me and I started this one so that there is one in south Ga for those people that also think that the other groups are too far to drive to just for a short cruise or so.
-
Sounds like a game plan. Let me wait to see what others suggest as well before I choose an idea. Thank you though
-
-
I installed LED strips on the BODY of my SL that I need to remove and replace. Does anyone know how I can do this without damaging the body or the finish. TIA
-
Where is this at
-
Lol
-
Can I have access to NSFW pleeeeeease