Posts by mikeboztx

After I sold SS back around May, look what he did to it. Added a wheel and supercharged it. Can't recall his name not sure if he found this forum.

If anyone is interested in these brackets and 2 Iron Rider bags I have them. Sold SS and kept them. Only used once. Had a 2018.

$300 shipped. Have several other items I need to put in marketplace when I get time.

The site shows they are sold out. any idea when they will be available. Also will the stage 1 exhaust that you sold individually ever be sold like that again without buying the whole kit.

Thanks, Mike

Ok where is the battery fuse block, and I wonder how this will affect the Optima battery I installed. Original battery quit working a month after I bought my 2018 in June 2018.

Got mine Wed and installed this morning. Defiantly cleans up aftermarket radio install.

This one works for me. holds a large QT cup.A little pricey but what isn't. Already had it from the bikes I had.

Can be found here but available several places.

https://ciro3d.com/collections/drink-holders

Mike

also ordered, If I can just stay out of rain till it gets here

I just got Kicker marine speakers from Slingmods yesterday and noticed a small plastic part that came with them. It looks like something could maybe plug into the ends. Any idea what it is ? No instructions came with them. Enclosures got here this evening but haven't seen them yet.

Thanks, Mike

Can you use aftermarket radio with stock rear camera on a 2018? This item looks like it will convert stock harness to RCA to plug into radio.

https://axxessinterfaces.com/product/AX-SSBACKUP

Thanks mike

Seems to be some confusion here. OP said the rear "TOURING" rear R&D pipes. On slingmods site it says end of Aug (tomorrow). The "SPORT" rear R&D pipes say end of Sept. I've bought a lot from them also but I'm still waiting on a part that says end of Aug. I doubt I'm getting it shipped tomorrow.

Another site, well respected here, never answered my calls or emails last week so I won't be buying this sizeable purchase from them.

I was ready to buy new seats because the backrest bolts on my 2018 keep breaking. Polaris will replace them but won't I have the same problem down the road. I was looking at Twist or the higher priced PRP seats. I don't like that the TD seats raise you up some. I was leaning toward the PRP seats at Slingmods until I read the reviews. seems people are complaining about bolts not lining up. I could deal with that but the other complaint is the seat bottom not being as soft as OEM seat.

Don't need a long list but who has the most comfortable seat that you would recommend.

Thanks, Mike

All but 2 of the bolts on my driver side back have come loose. They didn't fall out because they are attached to something that has broken off. Took it to dealer Sat. and they want to keep it for 2 weeks to get a decision from Polaris. The Question is does the bolts screw into the backrest? and is that what I need to replace. Its only 1 year old and probably going to be covered by warranty but I am not going to let them have it for 2 weeks and sit outside.

Mike

I am eagerly awaiting release of rear fender. I have the front fenders already and couldn't be happier. Hopefully a rear fender for stock SL size tire will be available. Oh! and I already got my IRS refund back.

Mike

Already booked a room. Was looking forward to Kerrville in the SS. I have been there several times on the bike. But now that I just figured out its on Easter weekend I may have to reconsider. I suspect that might hurt attendance. I guess there is a reason it was scheduled this way,

Are there still rooms at the Y O Ranch? If there are rooms how do you book them, through SSR or the hotel.

Mike

I've had FOBO on both Victorys and never had a problem. Unless FOBO has changed, the steel valve stems don't come with unit. They sell them separate and not that expensive. DON'T use FOBO without steel valve stems. The sensor unit will make the rubber valve stem break off. Coming back from Sturgis my buddy's rear went flat at 80mph in the middle of nowhere WYO. Two days and $900 because he didn't buy the steel stems for less than $15.

And the advantage of their valve stems is you don't have to remove the sensor to add air.

Mike

I tapped a 5/16 hole in bracket. The cross bars came with rack. they are 3/4X1" rectangle steel. No reason you couldn't use conduit are any square stock from Home Depot type store. Just remember on the Twist top the two bars are not the same length. don't ask me how I know that.

Mike

I now have the mounts and the rack (cage). The rack is the same as the one in post #55 above except that it is silver. It doesn't have the rectangle crossbars like I mounted mine. I bought the second silver one because I wanted the crossbars for another project. If you install it like the OP did in post #1 all you would need is the steel conduit. I would sell both for $100 and split shipping.

If anyone is thinking about doing this, I have the 4 steel mount clamps the OP list in post #1. I already drilled and tapped for 3/8 rod. Did it on drill press and they came out great. I went another route with my mounts. I would sell for $50 shipped if someone is interested.

I finally got mine done. My Christmas present. Thanks to VERN and AIROUTLAW for giving me ideas to solve the luggage issue with out breaking the bank. Mike