So it turns out the fuse labelled "TS/HORN" also serves the brake lights and indicator lights. Rather than one of the more obvious, "Aux. Lights" "Primary Lights" etc.
I learned an interesting lesson.... don't skim over the most ridiculously labelled fuse. I appreciate the help.
As far as the lights go, nothing changes if I move past the ON position. I didn't hear anything in the accessory position, should I? I checked the fuses in the battery compartment but they don't have an obvious 'test' post to use a light tester. Is it possible to test these fuses?
I'm new to the slingshot. Only drove it a few times. I had the dash apart to install handcontrols. They are mechanical, no electronic hookups. I unplugged the tacho/speedo/start button/display/hazard light/floor light switches to remove the dash. After assembly, my brake lights, indicator lights and obviously, hazard lights, don't work. When I turn on the L or R indicators, not even the dash lights (green arrows) light up. Nothing. 
I tested all the fuses under the hood. They are all working. When I tested the connectors for the hazard lights, I get nothing. I also tested continuity on the hazard rocker switch, only 1 pin (pin 3) gives me continuity in any position. I'm not sure if its the switch or not. I don't have a complete wiring diagram (despite some serious google searching). My dealer is a 3.5 hour drive away. I'm hoping to get on the phone with a mechanic tomorrow. But if anyone has some suggestions I'd love to hear it..... or a wiring diagram.
