Posts by JoeF.

    I just loosen bleeder screw until fluid comes out, the tighten it up, I don’t drain all fluid for a gravity bleed.

    Mine still going great after doing this quite a few times, brake light hasn’t come back on and pedal feels solid, I hope any others with spongy brakes tries this before making trips to dealer which never fixes this issue for me.

    I did the gravity bleed no less than 10 different times, near last time, soon as I loosened it, brake fluid would flow out, not the 2-4 seconds it took first few times, and I drove it each time....

    Mine has had mushy brake pedal since I new, had it to dealer quite a few times, bleeding brakes never lasted more than a few weeks.

    I had the famous brake light start coming on Late last year.... figure I get around to that eventually.


    I read a post quite a few months ago that talked about bleeding the top of block just under master cylinder, so I busted it lose and took a few seconds for fluid to finally come out, tightened it up and got in, pedal felt better, so every time I would go for drive it did that.....few months later, brakes are solid, brake light has not come on anymore.... go figure!

    Kev, not always sir!

    My first DDMWorks built engine had an issue after a few months of hard driving, not abuse, just having fun....

    Dave drove out to Texas and picked it up, ended up installing another engine, chit happens.

    He brought it back to me after swap...my bill for that was 0 dollars!!!!!
    DDMWorks’s made a customer for life!!

    That’s how some companies still treat there customers!

    I have run with stock shocks until I put a set of adjustables on rear, now I know the difference!!!!!

    I need to find a set for the front now....

    I'm noticing a clicking noise in the front when turning side to side, or when pushing my foot hard against the front tires. Been going on for a while. Turn left, there is a click on the right. Turn right, there is a click on the left. Possible sway bar issues?

    Check sway bar link bolts....

    If you look at the results of that it is from different stats that have reported during the whole time of this virus. You can do it with 4 digit numbers as well. We have 15 almost 16 million combinations of numbers that this will work with... Not so spooky now..... :)


    I was feeding.....;)

    Here is some fun..... go to Goggle, type in any number then “new cases”

    Example: 732 new cases

    You will get a result for no matter what number you put in, kind of spooky.

    I have seen as expected, nothing but praise from DDMWORKS and Dave......

    Once again, this company has gone above and beyond just another aftermarket company.

    My Supercharger was WAY past warranty.....like over 2 years..... I did not keep an eye on my BoV like I should, and do a simple lube to it. This caused an excess amount of pressure on the compressor wheel, which turned into a catastrophe failure of my supercharger.

    1 call to Dave, he worked with me to help get a new SC otw, he owed me nothing, but helped way above a beyond. In this day and age, all I wanted to say is, find a company like them, and stick with them!

    My wife and I were wanting to go see fireworks 4th of July , did not look like it was going to happen, but Dave/Angie made sure it would!

    Thanks so much to both of you!!

    Sincerely, Joe :)

    I am so sorry to hear of this......I have seen his post but did not know he was going trough this.

    Cancer is a rough battle, I fought through Leukemia at age 50 , came from nowhere...and bought my SS as soon as I could function good enough to drive again. I needed something to focus on and bring joy into my life, and it did!

    I knew to save for the future but also realized you have to live for the now....

    I will pray for the family.