Thanks I fixed the dates.
I have posted this in the "other" forum and to a couple of Facebook groups (New England Slingshots, East Coast Slingshots) but didn't know about the Northeast one, will try to find it, thanks.
Thanks -
NorthEast Slingshot on facebook is the biggest group by far in the area
Display MoreAttention MA/NH riders!
We are trying to plan out a ride from Nashua, NH to Rye Beach, NH. We will meet in Nashua then head up the back roads to Hampton Beach, then travel up the Route 1A coastal road (scenic and twisty!) and have lunch at Petey's Summertime Seafood in Rye (seems to be plenty of parking).
We are looking at a couple of possible dates:
Sunday Jul 1
Saturday July 9
Sunday July 10
Saturday July 14
Sunday July 15
Rain date to be determined after the date is set.
Is anyone interested? This would be a great ride with a bunch of Slingshots traveling together......
I am interested but my schedule is inconsistent / can change any given week but I can say that I work Sunday's no matter what and should have Saturday's off except for next week. So I should be able to make a Saturday right. The dates you have listed aren't right... July 9th is a Monday / July 10th is a Tuesday.
To get more interested you could check out the Northeast Slingshot Group on Facebook. This area here doesn't seem to have a big local following
I spent a long time today trying to get this installed. Can’t get it to work. I got the optional top air foil and that thing is a problem. The two bolts will simply not go in once the recessed torx bolt is tightened. They will not line up. I’m so frustrated I gave up after two hours.
Correct me if I am wrong but you are only supposed to put the 3rd bolt in through the Air Foil, that is the way that I read it. You only put the 3rd / original bolt in alone if you aren't installing the air foil. I don't have the Air Foil Installed on mine Yet / But have one sitting here that will eventually be installed.
I took my rented one last summer to MCN and met two other Slingshots there. Perhaps you were one of them? One had a lot of added carbon fiber, the other had a wrap and his hood open.
You can be sure I will be down there a lot this summer and I am only 2 towns over
Possibly, I have the SLR With the Custom Eagle Wrap, if you are who I think you are, I helped you back up when you were leaving. Congrats on getting one, I knew you would eventually. This year my schedule is more evening friendly and plan on attending Bike Nights and other events as much as possible.
New Slingshot owner here... Mass/NH border. My friend around the corner just got one too. We don't see too many around here...
Welcome aboard, I am in Waltham and I've only seen a few around as well. We have had some really good turnouts at Lowell Bike Night last year. Hopefully we will see the same this year as Slingshot is one of the Sponsors.
Display MoreI think these are the folks still waiting - please let me know when you receive or if I have forgotten anyone
@BKL
@chimbos
@ethermion
@funhouse69
@funinthesun
@lrobbi
@MISC
@MWSlingshot
@mytoy
@Nemesis1701
@roadog1aj
@Rob the Slob
@Stinger
Mine literally just showed up 10 minutes ago... They look AWESOME!!!! Thanks for doing this.
Does slingmods have any coupon codes for Black Friday.
No Codes - Everything is on sale up to 30% off depending on the item.
Doing it now
Sent from my iPhone using Tapatalk
Just sent payment for two calendars... Can't wait =)
I found this thread a little confusing. I'm not trying to ding the OP, but why is it even necessary to ask for replacements from forum members? Is Twist Dynamics not providing support for their product? A support bracket shouldn't be breaking even if it comes slightly loose, especially since losing something like a wing could have devastating results at Interstate speeds. If the brackets do have a tendency to break under normal usage, I'd think TD would step up and correct the problem.
I couldn't agree more with everything you said here however Twist Dynamics hasn't responded to me at all or even SlingMods who is being nice enough to try and get them to respond / help me when I didn't even buy the wing from them. I also feel that they should be replacing them not with the cheap crap that they are made out of but something better that won't shear off.
As Chad said I am getting OEM Brackets just to get the wing back on my slingshot and will more than likely get new ones made at my expense as I don't want to take the chance in the long run of the wing breaking off at some point. Should i have to? Hell no but I like the looks of the wing and want to make it as safe as possible.
Pm you buddy
Got the message, thanks for doing this, I really appreciate it
Hey @funhouse69 can you PM me your address again I lost the first email you sent thanks.
PM Sent
I've seen a few posts on facebook where people have had issues with the T-Brackets on their Twist Dynamics Wing shearing off if they are not kept tight. Mine were checked before a long trip and when I got back 2 of them were sheared off. I am looking for stronger replacements. Anyone have a source or suggestion of someone that can / will make them out out stainless?
@mytoy How long did it take to get your topcoat in? Been waiting for about two weeks on mine, think it is time for a phone call.
They were a little slow to ship for me, I ordered mine a few months ago and it took a few weeks if I remember correctly.
I got this after my friend in FL tried it on one of his Slings. I put it on the heavy way (basically soak everything / let sit for 30 min) and to say that this stuff is slick is an understatement. I don't know how long it will last but so far I am thrilled with it. After applying I went to wash my sling after it got really dusty and some bug guts on it, all you have to do it hose it off, not need for any scrubbing. I put it on everything except my brake rotors / tires.
That said I have a Partial Wrap, you want to take off everything beforehand for sure, most people will clean the surface with alcohol before applying any graphics which would remove the topcoat / F11 anyway.
@Bubblehead - This is a surface protector and not a wax, I don't believe that it will fill in any kind of swirl marks but you can use it with a clay bar so...
One word of advice, be mindful of where you apply this, if you get any on the floor it will be slick as hell as well. Don't ask me how I know that =)
@Uglyrider954 I think it is in Portsmouth, NH? That is the one I am seeing listed this Sunday.
Hey Guys - I know that there are a few videos online of how to disassemble the back end of a slingshot but can someone tell me how much has to be disassembled to install the Hoop LEDs from TrickLED? They only reference the videos on how to completely disassemble. I want to know what I will be getting myself in to if I decide to do this on my own.
I installed the Bad Boy Air Horn a while back and did a quick comparison video. To me it is quite the upgrade. I know there are many others out there, my buddy has one that has a tank mounted under the passenger side seat that is way, way louder.
Here's the link to the video.
Thank you, I checked with TricLED (as its their LEDs that I want to have installed) for local dealers / installers and they said they don't have any in New England. I checked with my dealer and they don't do anything or recommend anyone.
Here's my Baby So Far... Still a few little tweaks I want to do.
Hi Everyone -
I am looking for find a reputable company that has Slingshot Experience to install some additional LEDs. I know installing most of them are relatively easy but I am looking to have some installed that need to be wired in to the brake light circuit as some on the rear / sides LEDs which correct me if I am wrong means that some of the rear needs to be disassembled which I am not quite comfortable with nor have the work area for.
I stated Mass in the title but would consider surrounding areas as well.
Thanks in advance.
I can confirm that this is the actual connector needed to plug in to the Factory Harness to wire up a horn without cutting / tapping anything. That you to @BryanL for posing this.
I installed my Bad Boy Air Horn today, I wanted to use the factory location but it isn't really set up to work on that side so I mounted it on the other (drivers) side center headlight bracket like they show in the SlingMods Video. Works like a champ.
This one is for the horn side
Home » Shop » Connectors / Harnesses » Tyco / AMP » 2 - Way Receptacle Connector Pigtail
