Posts by jaycanter

@xxx4reggie mine 2015 sl hasn't been in for any recalls and mine has it also it's hiden by my seats but had it apart enough to know it's there

@mniron No i didn't move the hood back. I did the rabtech hood adjustment loosen, & wiggle the sides and re-tighten. i have the madstat hinges and when i push it down it latches all four corners and the hood buttons perfect, and i have all the same gap on all adjoining panels. spent the day to get it all perfect. so i am gonna do the tweaking of the lights to get them the same which should make my pins just about perfectly straight up. I'll update once i get it adjusted

@mniron Actually the drivers side is setting on top the light passenger not as bad see pics

@mniron here's some pics you can see the clean part on the hood where it has been rubbing. Mine are way off. centering the punch and leveling it was just off of the edge if the plate knowing i was gonna move the lights i moved the hole in enough to get a good hole on it. It's about 1/2 inch off. 1st thing i did was adjust the latches and the hood figured out how to get the lower front perfectly lined up pain but got it. then found hood does set on both corners of the blinker so i'm gonna slightly adjust both sides to get the bumper where it is supposed to be and the hood the same gap around the blinkers. Another project.

@KayTwo Did mine today wasn't that hard at all with the instructions only issue was the hole for the buttons was so tight i could only thread them in 1/2 way before couldn't turn them anymore. easy fix. and found out the passenger side light is farther back cause bumper won't go back up since hits the side 1st. gonna tweak the light assembly later but easy to follow instructions. Even though i was afraid to drill the hood after Painter just did it.

I just got the virb ultra 30 last week pretty cool what it can do

@Carbon_One Glad you got it the 8 oz container i have had for 1-1/2 and still works great about 15.00 on amazon the others are 1 time use per package. comes in handy with the slingshot since everything is plastic. even with the lights under my hood they don't come loose with the heat

I ordered from amazon I am sure someone shoud have it the sell little cardboard tube with like a littlesponge on the end when ready to use bend the cardboard to break the glass and leaks to applicator heres a link to couple different styles

Amazon.com: 3M 4298 Adhesion Promoter, Sponge Applicator 3 Pack (3): Automotive

Amazon.com: 3M Primer 94 Pen 0.2oz | Vinyl Car Wrap Application Tool (5 Pack): Automotive

here's what i have if you can't find any let me know and you can use some of mine if we can get together

@Carbon_One get some adhesive promoter to use before the tape i clean the plastic and stuck new mirror on to find 3 days later driving it started to come off i put promoter on and couple weeks now and couple hr drives and all is good better to be safe

Slingmods has 1 and the double din splash cover is here Double DIN - Splash Guard Installation

that's what i have but be prepared to cut the dash opening bigger

as @Ruptured Duck says take your time i missed pics and just uploaded you can see some foam still on it i started at the small outside part to get started then worked around wiggling from side to side. Doing that left some tape on the plastic. The new mirror does take some getting used to.

@cball86 i guess it was good it was nice yesterday or me and @Tony-b would have filled the box with entries yesterday while we were there @ richmond

@Carbon_One I purchased the slingshotonly convex mirrors and didn't want to stick it over the old glass so i heated it with heat cun and used a 1-1/2 metal putty knife and removed the glass and is perfect. it can be done with patience i attached pics the glass is just 2 side foam tape. If you want to get together i can give you a hand with it

It's between the stock display and the engine it stands upright on a bracket

Sent from my Pixel XL using Polaris Slingshot Info mobile app

@philip_mustang it comes with 2 keychain remotes also so you don't have to use the phone

@philip_mustang i have this item running my light and the wind resrictor it has a brake input and a hazard function. it runs off my phone and can have undercarage 1 color and wind resrictor another when i hit the brakes all go red.

LEDGlow Advanced Million Color SMD LED Control Box with Smartphone Control

@kenny_h Thank You Sir Hopefully meet at SSITS and buy you a drink

Quote from gooseman

Jay you need one of them gremlin bells. One of them little bastards must have stole the nut when you weren't looking

@gooseman It was 1 of those Canadian Gremlins

Quote from MiM

Or the kenny_h pods.

@MiM I'm on Kenny_h list

Been to lowes, home depot, local locksmith. It's in-between pipe sizes. Parts breakdown shows whole lock as 1 piece. Amazing how something comes off inside a compartment and disappears.

Good idea @MiM guess we'll see if anyone has 1 or i guess I'll be buying whole lock - or maybe Ssv box

Opened my passenger storage compartment and lock fell out couldn't find the nut that holds it in place. Any ideas where i can get a new 1?

Cue Tripod