The dealer sent video to Polaris according to them and Polaris wanted them to investigate the noise so I had dealer order bearings ahead of time. made an appointment and dropped it off for this and clutch leaking on a Tuesday.. Friday i stop cause i haven't heard anything. They said there tech thinks it's the belt rubbing and want to align it, Told them there's no way rubber makes that sound so they bring the tech up looks at video and says it's not the belt. Says send video to Polaris again waited a week stop back by and they look at response and Polaris told them to remove bearings with there special tool and overnight to an address. so again appointment set for Monday and we will see what next but hasn't made any noise lately.
Posts by jaycanter
-
-
@WOLF so i should just go ahead and install the shroud and see how it works?
I'm looking at ordering a madstat maybe not sure on size
-
Thanks @WOLF That's what i thought went down jefferson yesterday and by the time i got back it was hot inside even with the baker wings blowing air in. so fiqured to see if anyone has done it and any other issues before i jump in and do it.
-
Has anyone with the kit to fix the heat have alpha skid plate. did you have to modify? to me it looks like the shroud wound be blocked with the skid plate and would need modification. Who's done this?
Thanks
Jay -
ordered before i took delivery
Accessory Fuse Block and Wiring Harness Kit
Curb-Alert System
Alpha Transmission Dust Cover
TricLED Headlight On/Off Switch Kit
Tucked License Plate Bracket
Speaker Accent Rings
Angel Eyes / Halo LED Headlight Kitafter took delivery
Assault Mirror Trim Kit
RAM Mount Cell Phone / GPS Holder
Keyless Ignition
SSV Works Front Speaker Pods
Electronic Tire Pressure Monitoring System
PRP Marine Vinyl Shift Boot
Fab Factory Panoramic Top
Alpha Adjustable Master Cylinder Brace
Alpha Powersport - LED Front Grille
Bilstein One-Way Adjustable Shocks
DDMWorks Short Shifter
PRP SS Style Suspension Seats with heat and lumbar
Electrical Connection SAE Battery Charge Port
Alpha Front Skid Plate
Alpha Powersport Reinforced Hood Brackets
Aluminum Adjustable Mirror Riser Kit
Fab Factory E-Brake Handle Cover
Assault D-Shape Steering Wheel
NRG Aftermarket Steering Wheel Short Hub Adapter
NRG Gen 3.0 Quick Release
Assault Industries Aluminum Rear Shock Mount
Madigan MotorSports Harness Bars
50 Caliber 4 poit harness
POLARIS ENGINEERED OIL FILTER
COCKPIT COVER
Hood Pads Red
Slingshot Jump Ports
Swing Arm Mud Guard
Floor Mats Red/Black for the Polaris Slingshot
Radio Sun Visor
Windshield F4 Plus 3 Tinted
Combo Kit #2
Glove Box Liner
LED headlight Bulb Hi
LED headlight Bulb Hi / Low
Floor Mats Gen 2 Black/Red
LED Center Headlights
Silicone Coolant Hose 9 PC Kit
Radiator Cap
Cam Adjuster Cap
Brake Master Cylinder Caps
Valve Covers Carbon Fiber
Coil Covers
Emergency Brake Covers
Shift Knob with AdapterLED Splitter Lights
Hahn Turbo with side exhoutdual zone led accent lighting
Pioneer double din gps stereo
rockford fosgate anp for speakers
10" sub
rockfort amp for sum
AEM Failsafe gauge
innovative water tep
innovative oil pressure/temp
Baker Air Wings
side view cameras tied to blinkers
tricled lower brow
Fab Factory axle lock and belt cover
painted calipers
jmod
double din splash cover
2- way alarm
nitto 555 g2That's all i can remember for now
-
-
@Ross I started with the led glow
LITETRIKE II ADVANCED MILLION COLOR LED LIGHTING KIT the 3" stips that came with the kit fit perfect in the 3 holes
then added the new 2 color smartphone controller so i can have unlimited colors by just moving my finger around on the color wheel in the app.
-
-
I went with Led Glow million color it is remote control and has bluetooth with an app. it can do 2 different zones so i have interior 1 color and under different color. also has hazzard function and brake. so if there on and i hit the brakes everything goes red then let off and goes back to its multi color. there also running 20% off right now.
Sorry no pics but could get some tomorrow if interested.
-
@rickgi the prp seats use the stock brackets so they will lean back the same as stock not sure how the corbins are. But the prp ss styl you sink into the seat instead of setting on top like the stock seat. Hope that helps
-
@cball86 Update
Hey Guys...
Couple updates:
1. The lot will be open to park in at 4pm, and if possible everyone should arrive by 6pm for the meet and greet.
2. I have hired a food truck "The Mean Weenie" (The Mean Weenie | , MI) to serve food from 6pm-8pm. Anyone who brings a slingshot to the event, the food is free.
3. Still hoping to have 2017 demos on site and available for test drives, however waiting on Polaris.
4. At 8pm we will take off and do the Drew Cruise Lap
5. When we finish the drive, we will pick a TBD location for an after hours hangout with more food and a few drinks.
If possible, it will help me out if people wishing to attend can shoot me a pm @cball86 in advance so I can plan on the numbers.
thanks, I will have more soon.
26454 Woodward Ave
Royal Oak, MI 48067I know there were several people that got together and run the cruise on Wednesday night. Looking to see how many we can get?
-
My dealer in Michigan is having ss Saturdays since they have so many in stock. I could use some to give out.
-
Thanks Painter since i got about 10 miles since the noise started gonna have to drive up to the dealer, for them to look at. and was afraid it wouldn't make it.
-
Did it get louder?
Thanks
Jay
-
I figured it was the bearings from the videos iv'e seen, just wondering how long i can drive it? Maybe a few weeks till parts come in?
-
I thought the same thing but if your coasting around 30 mph you can hear it. swerve to the left noise goes away swerve to the right it gets noisier
-
when i jack it up theres no noise
-
No There just painted
-
I have seen other videos of bearings making noise and mine sounds like it's doing it.See video below. Have had 5000 miles with no problems, also there is a rumble while driving but if i steer to the left it quits, steer to the right gets louder. I just don't want to park it while waiting for bearings if thats the issue and takes weeks to get them.
am i safe to drive it for now? How long has someone drove theres while making noise?
Also i did check the nut i have a axle lock on it but checked it anyways.