Try Auto Zone they have a selection in the stores.

.

If you have an extra 1/8" clearance between the filter and pan and 1/2" in length this would work.

AEM Induction Dryflow Synthetic Air Filters AEM-21-2036DK

https://www.summitracing.com/parts/AIS-21-2036DK

.....

.

.

Quote from flipr

I have a Hahn knock off CAI, opened hood and found air filter lying in the metal base. Seems the rubber flange just disintegrated, probably sun, heat, or some rough roads, but for whatever reason, it failed.

Looking at the K&N website, I can't find one that has a 3" opening. My pipe from engine to filter is 3" outside diameter.

Supplier used filter that was 6" long, and 4.75" around, rubber flange was 3" ID to fit over the inlet pipe.

Attached a couple pictures for reference.

Thanks for suggestions.

Display More

PL- 2417 is the k&n # for the SLR setup.

Don't know if it's what you're looking for.

Quote from flipr

I have a Hahn knock off CAI, opened hood and found air filter lying in the metal base. Seems the rubber flange just disintegrated, probably sun, heat, or some rough roads, but for whatever reason, it failed.

Looking at the K&N website, I can't find one that has a 3" opening. My pipe from engine to filter is 3" outside diameter.

Supplier used filter that was 6" long, and 4.75" around, rubber flange was 3" ID to fit over the inlet pipe.

Attached a couple pictures for reference.

Thanks for suggestions.

Display More

https://www.knfilters.com/re-0…ersal-clamp-on-air-filter

3" inlet, 6" long

Call K&N. They warranty those for a million miles. They will prob send you a new one for free. They did for me a few years ago.

Sent from my SM-G960U using Polaris Slingshot Forum mobile app

What is everybody using for a cleaning interval? And are you using the K&N cleaning kit? Or is there an aftermarket kit preferred?

Quote from SoCal

What is everybody using for a cleaning interval? And are you using the K&N cleaning kit? Or is there an aftermarket kit preferred?

Depends on where you drive - if it is dusty 2 or 3 times a year. KN makes a few different covers either fabric or foam that help. you can take them off and clean them much easier.

FLIP rider I have this sitting in my garage if you’re interested.