Can anyone help me in how to raise/lower/adjust the front fender on a Slingshot? I noticed my passenger side one had somehow slipped out of its housing slot and I can't seem to just push it back together. It just drops again immediately. Any help would be greatly appreciated. See pic. Thanks.
Adjust lower front fender
-
-
That piece has eight screws (4 to a side) holding this on. Loosen all 8 screws/bolts and put this piece back in position and retighten the screws/bolts. You have more that likely hit something, curb or speed bump and knocked this out of line.
-
There is also square box mounting tabs on the tube that get bent. You can staighten them with plyers.
-
Simply grabbing the metal bar that supports that lower wing and pulling it back into position should also straighten the lower wing.
-
Pictures included...
Don't really need the jack.
But, if you're lonely...
It can be an extra hand.
The train just left the tracks!
-
here is a picture that shows the 2 brackets and 4 bolts on each side
If my memory serves me correctly I believe the top 2 are 8mm and the bottom are 11mm as you can see the brackets have slots that allow for the wing to be adjusted to fit properly
its very easy