What was today's Sling project-Mods , goodies....?
-
-
Did a small project getting ready for Slingshots Uncorked. Got in the engine dress up kit from Kyle D. ZZP put together a very nice bolt and washer kit.
Hot damn... That's a nice engine bay. Clean AF...
-
this is what I fit got the clamp and powder coated them
Thanks, that was very clear on what to do. I appreciate it.
-
Thanks, that was very clear on what to do. I appreciate it.
any time, I’m glad I could help, just make sure you leave about 1/8 clearance
-
any time, I’m glad I could help, just make sure you leave about 1/8 clearance
Appreciate the post as well. Do you have 4 of these or just the two on one side? I ordered 2 of them and was thinking 1/8 on outside (tire side) on each side?
-
Appreciate the post as well. Do you have 4 of these or just the two on one side? I ordered 2 of them and was thinking 1/8 on outside (tire side) on each side?
just on the outside (tire side)
-
Okay, WTF is That?!?!?!?
I saw yours and thought, Okay, That's really pretty and I like it. I should go paint my intake like his. Then I looked at mine and noticed that is nothing like mine.I'm presuming something for the turbo, but what kind? Spill the details.
-
-
either what SoCal said or maybe a Hahn Racecraft Street Race intake manifold Street Race Manifold
I think there was another company that also made a similar intake
-
chavey2 that’s the new fragistat extension for the modification of the emulsifier unit that works seamlessly with the mobile intensification outlet. Can’t believe you didn’t know that!😜
-
Okay, WTF is That?!?!?!?
I saw yours and thought, Okay, That's really pretty and I like it. I should go paint my intake like his. Then I looked at mine and noticed that is nothing like mine.I'm presuming something for the turbo, but what kind? Spill the details.
This is a Hahn intake manifold. He was nice enough to build it to my specs.
Rocking a DDM supercharger with some upgrades.
-
My son-in-law and I installed the TricLED Afterburner tail light kit from SlingMods. Don't tell me that you can't see my rear now!
-
Okay, WTF is That?!?!?!?
I saw yours and thought, Okay, That's really pretty and I like it. I should go paint my intake like his. Then I looked at mine and noticed that is nothing like mine.I'm presuming something for the turbo, but what kind? Spill the details.
Yep! That would be a Hahn intake, I have a red one on my NA Sling I. It seemed to increase power just a little bit and changed the power band range from around 3,500 to 5,200 RPM to around 3,500-to red line. Yes, you can tell the difference. Sling I would be one of the Sling's in the video that was running at his shop in Daytona during bike week
-
My F4+5 windshield arrived tonight. It'll be going on this weekend... 😎
-
My F4+5 windshield arrived tonight. It'll be going on this weekend... 😎
Do you have a center brace on the windshield that is on the Slingshot now? The F4 5+ will need the center brace. What year Slingshot do you have? 2015 thru 2019 with two people helping you can install the center brace without pulling out the radio. With the hood open a long slender arm can hold the lower plate in place while the second person blots it in place. You can reach in the center under the dash from the engine compartment.
-
Do you have a center brace on the windshield that is on the Slingshot now? The F4 5+ will need the center brace. What year Slingshot do you have? 2015 thru 2019 with two people helping you can install the center brace without pulling out the radio. With the hood open a long slender arm can hold the lower plate in place while the second person blots it in place. You can reach in the center under the dash from the engine compartment.
Thanks, EJ... yes, it came with an NRG billet center brace and I discovered during my recent stereo upgrade that it's very easy to remove the Ride Command and access everything behind it, so I'll be able to install that mounting bracket for the center brace without any trouble.
-
I was thinking about buying a new Slingshot yesterday. I took a look at a new green one but didn't like the way it fit. I think I made the right decision in not buying it. I was thinking about debuting it in Maggie Valley, but it really didn't seem to be as comforatble as the old one
-
I just finished the oil change and brake bleed, I also changed out the clutch res. I still have Sling I to do.
-
this is what I fit got the clamp and powder coated them
I believe these would be the clamps needed 32mm - - Sway bar clamps
-
DDMWorks Supercharger arrived. Now just waiting on the 1320 exhaust combo to start the install. Should arrive shortly. I removed the stock exhaust prior to running two tank fulls of premium gas. So... have to install the new exhaust, run through one more tank of premium. then install the supercharger!