What was today's Sling project-Mods , goodies....?
-
-
All done! 😁😁😁
-
Looks great!
-
All done! 😁😁😁
Looks good but for some reason I thought you were going with black
-
Today's project(s). Valve cover, coil pack cover and firewall finish panel.
put anti seize on the manifold cover bolts.....
-
just finished the other knob and am finished building the harness for my 12 zone haltech expansion module. And here is the whole center piece...
-
put anti seize on the manifold cover bolts.....
Actually, the next mod on my list is a 1320 V2 header.
-
making a whole new dash center. Trying a new radio so we shall see how this goes... on the right is the 12 position boost controller. And on the right there will be a launch control dial. Working on that next.
Looking good!
But.... Please fix that sticker and ensure your OCD is at its best...
-
just finished the other knob and am finished building the harness for my 12 zone haltech expansion module. And here is the whole center piece...
Seeing all the things you’ve done in the past FIVE green/GO buttons and only ONE red makes perfect sense😉
Is the red button for the parachute?
-
Seeing all the things you’ve done in the past FIVE green/GO buttons and only ONE red makes perfect sense😉
Is the red button for the parachute?
Passenger ejection seat!
-
Watched Sam Owens' video last night about how to adjust the alignment of the front splitter, then looked at mine, and sure enough, mine is completely out of whack. Gonna fix that today! 😉
-
Watched Sam Owens' video last night about how to adjust the alignment of the front splitter, then looked at mine, and sure enough, mine is completely out of whack. Gonna fix that today! 😉
Don’t do the job without some loctite. It makes all the difference! I used the blue and have already disassembled once after that. All bolts were able to come out ok but we’re still very tight! Well worth it. Also, if you have a 18-24 inch extension on your ratchet it makes things much easier
-
Don’t do the job without some loctite. It makes all the difference!
DON’T use the red loctite unless you never want to remove the screw later. Use blue that way it can be broke loose and removed if necessary later
-
Don’t do the job without some loctite. It makes all the difference! I used the blue and have already disassembled once after that. All bolts were able to come out ok but we’re still very tight! Well worth it. Also, if you have a 18-24 inch extension on your ratchet it makes things much easier
Thanks, SoCal, I have all those things and I'm just about to get started on the adjustment (had to vacuum and mop all the floors in the house first) gotta keep mama happy... lol 😉
-
Thanks, SoCal, I have all those things and I'm just about to get started on the adjustment (had to vacuum and mop all the floors in the house first) gotta keep mama happy... lol 😉
A leaf blower works well. You know, if she's not home...
-
DON’T use the red loctite unless you never want to remove the screw later. Use blue that way it can be broke loose and removed if necessary later
I didn't even know they had "red" all I've ever had is blue.
-
Watched Sam Owens' video last night about how to adjust the alignment of the front splitter, then looked at mine, and sure enough, mine is completely out of whack. Gonna fix that today! 😉
All done! Not a lot of difference, really, but much better. I learned a couple of things in the process... 1) the brackets and bolts that hold the splitter on only allow you to slide the splitter forward and back. If you loosen the top bolts, you have a small amount of up and down movement, but not much. 2) I imagine, with the flexibility of all that plastic, the fit & finish of everyone's Slingshots is probably a little different, but at the end of the day, job well done!
-
All done! Not a lot of difference, really, but much better. I learned a couple of things in the process... 1) the brackets and bolts that hold the splitter on only allow you to slide the splitter forward and back. If you loosen the top bolts, you have a small amount of up and down movement, but not much. 2) I imagine, with the flexibility of all that plastic, the fit & finish of everyone's Slingshots is probably a little different, but at the end of the day, job well done!
Generally want them even and balanced....
-
All done! Not a lot of difference, really, but much better. I learned a couple of things in the process... 1) the brackets and bolts that hold the splitter on only allow you to slide the splitter forward and back. If you loosen the top bolts, you have a small amount of up and down movement, but not much. 2) I imagine, with the flexibility of all that plastic, the fit & finish of everyone's Slingshots is probably a little different, but at the end of the day, job well done!
Roadhawg nice work. Now all it needs is one of Dave@DDMWorks front V2 splitter. 😎
-
Watched Sam Owens' video last night about how to adjust the alignment of the front splitter, then looked at mine, and sure enough, mine is completely out of whack. Gonna fix that today! 😉
Do not get too frustrated with it while adjusting, you may not get it where you want it.