Take the blue 1 1/2 inch painters tape and cut in pieces large enough to cover each letter, doing one letter at a time. Trace the outline of the letter with a sharp pencil, then remove and stick on whatever tape or vinyl color you are going to use. I used the red 1 1/2 inch reflective tape for mine. Now carefully cut out with a sharp blade doing one letter at a time and then stick on the SS after cleaning the plastic real good. The only one you will have a problem with is the star inside of the " O " so cut the outside out and stick on the SS. Then very carefully stick one point of the star at a time and cut out with the sharp blade ( CAREFUL AS TO NOT CUT INTO THE PLASTIC ) Take your time and do not get in a hurry and it will turn out good. Good Luck
