Rear fender question

Attention Vendors. Please email robert@rabtech.com any instruction manuals you may have for your products. They will be added to the FILEBASE tab for members to access.
  • mine doesn’t have the built up area on top like yours does. I can see a circle but no reinforcements on top.

    The built up area on the side is the same though.

    Anyway, that’s why I asked. Since I have no idea how thick the metal is there, I think I will figure out another way.

    can you get us a pic of that area, nice and close. I'm just guessing but they may have just quit drilling and tapping. If you're seeing a circle there it's probably still the same casting.

    Where's Goats_Hogs when you need him, oh yeah, that's right he's busy having fun.😜

  • mine doesn’t have the built up area on top like yours does. I can see a circle but no reinforcements on top.

    The built up area on the side is the same though.

    Anyway, that’s why I asked. Since I have no idea how thick the metal is there, I think I will figure out another way.

    yes, on mine the metal on top where the pre drilled and threaded hole was is built up in a raised boss, I would guess 1/4 or more thick / tall. when I got my slingshot the hole was empty and there was talk on here where people recommended putting a bolt in the hole so that debris or water could not get into the swing arm. I dont know why polaris put a threaded hole there, but it would seem that whatever it was they changed their mind - - if yours is flat across and does not have the reinforced area I dont think I would feel comfortable drilling holes.

    Cage Free - 2016 Pearl Red SL
    JRI GT coil overs, DDM short shifter
    Twist Dynamics Sway Bar & DDM mounts

    MeanSling Sport Top & OEM Dual Windshield + Misc Goodies

  • I was just looking at e rear fenders on slingmods.com and with all of the Metricks fenders that use the mounting hole on top they only list them as fitting 2015 through 2018 - taking this in to account and then seeng your picture it looks like the swing arm was changed for 2019 and does not have the necessary mounting boss


    You might want to call slingmods or better yet Metricks and ask them before you think about drilling the swing arm

    Cage Free - 2016 Pearl Red SL
    JRI GT coil overs, DDM short shifter
    Twist Dynamics Sway Bar & DDM mounts

    MeanSling Sport Top & OEM Dual Windshield + Misc Goodies

  • I was just looking at e rear fenders on slingmods.com and with all of the Metricks fenders that use the mounting hole on top they only list them as fitting 2015 through 2018 - taking this in to account and then seeng your picture it looks like the swing arm was changed for 2019 and does not have the necessary mounting boss


    You might want to call slingmods or better yet Metricks and ask them before you think about drilling the swing arm

    Yeah, I think I might just have to eat the money I spent. It wasn’t a lot.

    Maybe I’ll figure out something.

  • Staphory


    I don't own a 2019 or have immediate access to that unit.


    The 2019 maintenance manual and the OEM parts illustrations still show that screw boss.


    Is your 2019 purchase new or used?


    Looked at your pics and it may be a trick of the paint glint, but there appears to be a cone shape with a round dimple. It appears to be either a putty filled and painted area. Or been ground down and painted.


    Here's your pic back with the area I see...

    20190915_231902.jpg


    Maybe someone with a 2019 can clarify.

    Not knowing the model, that swingarm appears to be custom painted.

    Slingshot Flyer! Well, of course it's red...

  • Just remember our swing arm has about 6” of travel when it’s bouncing up and down. That’s a lot of pounding. That’s why my license plate bracket was beating the crap out of my fender. If you use this fender you need to move your license plate to the side of the wheel. And it also stressed the fender bracket enough to snap off the uprights. Which I took off (fender) in the spring to paint and it’s still not painted. But it’s on the “to do” list.

  • I’ll have to look tomorrow, but I think it’s the light.

    Mine is a 2019 purchased new back in April. Completely stock swing arm. There are two or three circles in that area that appear to be left over from the casting process.